Fits: YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
The KITACO Full Exhaust System Gasket is simple to install since it is just a gasket. It is just smaller and softer than the OEM gasket by a bit. Hence, requiring you to make sure you've set your header pipe already to avoid dropping it. I got mine dropped within my bash plate and it is a pain to remove. Since KITACO added another piece, I wouldn't worry much about replacements anytime soon.View Detail
Fits: YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too.View Detail
Fits: YAMAHA XSR900 16-20, YAMAHA MT-09 14-20
比原厂轻了好多,低转声音浑厚,高转高亢!动力也提升了!只是回小区要熄火推着回去怕吵着人,也好、推着省点油!----------------------------------------------A lot lighter than the original, turn low deep voice, high-pitched turn! But also enhance the power! Just back to the district to turn off push back Pachao people, beating, pushing the provincial point of the oil!Powered by Google TranslatorView Detail
Fits: YAMAHA TRACER9GT+ 8BL-RN70J, YAMAHA TRACER9GT 8BL-RN70J, YAMAHA MT-09 SP 21- 8BL-RN69J, YAMAHA MT-09 21- 8BL-RN69J, YAMAHA XSR900 22- 8BL-RN80J
I was not particularly dissatisfied with the OEM Exhaust System, but I happened to find the Exhaust System development blog, and I was browsing it with interest, as the parts that tended to be a little jerky were connected pleasantly. I was browsing the Exhaust System development blog with great interest.
I was told that delivery would be around July, so I waited patiently and was impatient when it arrived right away, but I had time to install it right away.
The Instruction Manual for installation instructed us to remove the lower bracket of the Radiator, but I think it would be easier to remove the upper bracket as well.
*Work is easier to reach and work from the Left Side, mainly with respect to the direction of travel.
BoltQuantity under the belly after removing the Bolt of the Exhaust pipe.:The OEMExhaust System comes off with 2pcs, but if you don't have a Jack or foot under it to support it, it will bottle up and fall off.
If you follow the instruction manual, there is no problem in particular, but if you fix the Exhaust SystemBody first, you will have a hard time connecting each exhaust pipe and the assembly part, so you should put some dustcloth on the wood or jack to prevent the wound from sticking. I think that it might have been better to put dustcloth on the wood or jack so that it can be moved back and forth with the Exhaust SystemBody supported, and then insert it into the exhaust pipe, while looking at the Exhaust System that was damaged by hitting various places while supporting it with my foot. I am thinking about it while looking at the Exhaust System that was damaged by hitting various places while supporting it with my foot.
I have only done some light driving around the neighborhood, but it was easy to ride with Torque coming out from low rpm.
However, the characteristics of the OEM exhaust system have not been changed from the OEM exhaust system to a larger system, and the volume is not bothersome, so even if you ride a long distance, you will not get tired of the sound. I don't think I will get tired of the sound even if I ride long distances.
Exhaust systems for the New Model MT-09 have been available from overseas, but we think this would be a very good option for those who are concerned about the design, which would lose the sense of compactness that had been settled under the belly, and the non-approved parts.View Detail
Fits: YAMAHA TRACER900 15-20 GT available, YAMAHA MT-09 14-20 ABS, YAMAHA XSR900 16-20
Was the one you received as per Image?
AKRAPOVIC is a quintessential AKRAPOVIC, with really high QUALITY.
Was the installation difficult?
I think the troublesome part is up to the installation of the exhaust manifold.
The Gasket to the exhaust port was difficult to get in and was a pain to get out and fall out.
Also, be careful with the Stud bolt on the exhaust port.
Overtorque or single-point tightening may result in breakage.
Be sure to tighten evenly etc. and use a Torque wrench.
Other than that, there is no Large work.
I think it is better to retighten the nut at the stud bolt after some driving.
I was able to retighten about 1/3 turn.
PLOT, a Japan distributor, has posted a video of the installation, so it is easy to refer to it.
How was your experience with it?
The look is great because we didn't want to break the OEM Style.
The rest is quiet because of JMCASpec.
I don't know how it runs because I changed it as fast as I could on the day I took delivery of the car.
I don't think there is any change.
[Included Parts:were they on?
Anti-seize Grease
Torque is also listed in the instruction manual.View Detail
Fits: YAMAHA TT250R Raid 4GY [stock number]4FM-14613-00 [model name]TT250R Raid [type]4GY3/4GY5/4WA1, YAMAHA YZF-R1 RN24J [stock number]4FM-14613-00 piece4 [model]YZF-R1 [type]45B1/45B2/45B3/45B4/45B5/45B6, YAMAHA XSR900 RN46J [stock number]4FM-14613-00 piece3 [model]XSR900 [type]B907/B90B, YAMAHA YZF-R1 CN04C [stock number]4FM-14613-00 piece 4 [model]YZF-R1 [type]4C8E, YAMAHA YZF-R1 CN03C [stock number]4FM-14613-00 piece 4 [model]YZF-R1 [type]4C87
Fits: YAMAHA MT-09 17-20 (2BL-RN52J)ABS
After running about 1000 miles, I was surprised at how easy it is to ride with just the Exhaust System. Since I bought this motorcycle, I had been thinking that the acceleration was a little too fast, so I was satisfied that the machine characteristics became mild by a large margin. But it is not too slow and the exhaust sound is not too loud. (^-^) /View Detail
Fits: YAMAHA XSR900 16-20 EBL-RN46J, 2BL-RN56J, YAMAHA MT-09 14-20 EBL-RN34J, 2BL-RN52J, YAMAHA TRACER900 18-20 2BL-RN51J
I finally changed it after 3 years of riding.
I thought the sound would be quiet because the car is inspection compliant, but after replacing it, the elegant bass sound is pleasant.View Detail
Fits: YAMAHA TT250R Raid 4GY [stock number]4FM-14613-00 [model name]TT250R Raid [type]4GY3/4GY5/4WA1, YAMAHA YZF-R1 RN24J [stock number]4FM-14613-00 piece4 [model]YZF-R1 [type]45B1/45B2/45B3/45B4/45B5/45B6, YAMAHA XSR900 RN46J [stock number]4FM-14613-00 piece3 [model]XSR900 [type]B907/B90B, YAMAHA YZF-R1 CN04C [stock number]4FM-14613-00 piece 4 [model]YZF-R1 [type]4C8E, YAMAHA YZF-R1 CN03C [stock number]4FM-14613-00 piece 4 [model]YZF-R1 [type]4C87
At the time of replacing the exhaust pipe of WR250R with SP Tadao PowerBox, I used it as Gasket of Engine side.
Naturally, the fitting is quite good and there is no problem at all.
It's cheap and I'll Repeat again.View Detail