Fits: YAMAHA MT-09 SP 21-, YAMAHA MT-09 21-
I really like it.The design, completeness, and bracket fitting of the object were perfect for my standards.The accompanying manual was in Japanese, but the pictures alone were enough to explain.View Detail
Fits: YAMAHA MT-09 SP 21-, YAMAHA MT-09 21-
I was looking for an Under Cowl that could catch oil, and I found this product and ordered it.
The installation was confirmed as AKRAPOVIC Exhaust System, but we have replaced it with SP Tadao Exhaust System (POWERBOX FULL RS), and the expansion chamber part is cylindrical, so we purchased it on the premise of modification.
After confirming that the rear end would hit as expected when actually installed, the necessary area was shaved off a little at a time to match the actual product.
The object is cylindrical in shape and the under cowl is also inclined, so it did not go as expected. After repeatedly removing and shaving, shaving and matching, we finally secured clearance with the expansion chamber, and when we tried to install it, the screw position did not match slightly.
After forcibly installing it and rechecking the clearance, I found that the expansion chamber at the rear end was not hit and the parts at the mounting point were loose enough to allow for some adjustment without tightening the bolts, but when I looked underneath, I found a moccoli that looked like the forward part of the expansion chamber.
I thought about cutting up this area as well, but it would be a complete disaster if the oil receiving function is lost, so I decided to put Heat Insulating Material on it for now and see how it goes.
I completed the installation and test drove it to lightly fill it with Gasoline, but it smelled a little burnt? I thought I would give up and drill a hole in the oil receiver if it burns, since I usually remove the oil receiver rubber plug.
This time, it was installed outside of the conformity. I wished the bottom was 5 to 10mm lower and the back end sloped back a little more, but I am satisfied because it is almost exactly as in the Image.View Detail
Fits: YAMAHA MT-09 14, YAMAHA MT-09 15, YAMAHA MT-09 16, YAMAHA MT-09 17-21, YAMAHA MT-09 18-21
Installation requires drilling. Because of its flexibility, it is easy to install if you can locate the holes.View Detail
There are many things, but this was the closest to the ideal shape.
I thought about leaving it black to make it less noticeable, but I painted the Bikini cowl, Front Fender and Under Cowl in OEM colors.
As for the bad part, …
Water from washing the car and Garbage etc. from driving will accumulate at the tip of the cowl. (I'm contemplating making a hole for this one.)
It is necessary to remove the oil when replacing it. (But it's easy because it's 4 screws.)View Detail
Fits: YAMAHA MT-09 SP 18-21, YAMAHA MT-09 17-21
I used it for Seat of MT-09SP. Cut is necessary to avoid interference with the lens.
It looks cool on the outside, but if you put a SeatBack on it, it will be slippery. No recommendation.
The design is like a casual Single Seat, and I want to customize it in a casual way. I can recommend it to anyone.View Detail
I got the MT from a friend of mine who was changing from the MT-09 to the XSR900
I had an XSR with an Orsen TEC exterior, so I changed it to take advantage of that influence, but Large It was the right thing to do
The installation is made by Y's Gear, so it went on easily and without a problem
The white color scheme makes it look light and airy
Because the top of the tank was a little insufficient, I used a Carbon StyleCutting sheet to make it I added Accent
Large satisfied for this price for the Exterior SetView Detail
Fits: YAMAHA XSR900 16, YAMAHA MT-09 To Racer 16 FJ-09, YAMAHA MT-09 To Racer 15 FJ-09, YAMAHA MT-09 16 FZ 09, YAMAHA MT-09 15 FZ 09
For North America Yamaha OEMAttachment is a terrible item.
Is the image of product details firmly taken, is Level suspected image processing.
To be honest I'm ashamed of the Touring fellow who took over 8,000 yen or more of gold on such a Carbon Plate 2 pieces.
Do you know the meaning of Attachment? If you just cut the Carbon board and paste the Double-sided Tape, you can even imitate an amateur.
If you do not paint something, put Slit or design nature, no matter how much you say overseas products, this price is strange and the feeling of being deceived is not half-ended.
This product is the first time I bought Motorcycle Parts so far, I felt sadly like this.View Detail
A new model also took out, and we planned Makeover around here.
I planned Pace for Race blue but Blue came out with a new color Pass.
So, I purchased it as a traditional Coloring.
As painting is an OEM product, it is obviously beautiful, so it became a gorgeous image at once.
However, FFender's Logo - Side scoop - Design of Side cover is not painting but decal processing. I was sorry to think that it was painting, but I was satisfied because the price was cheap. Originally I did not like DARK Violet and I am satisfied.
View Detail