- passer:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...og mere.
Snugged it up and engine is much quieter now as it would be expected with a new ProX chain.
Automatic one was all out of adjustment and keep the chain too tight.Quality and finish is good. Came in a f...Læs mere - passer:
- KAWASAKI
Being a person who likes analog gauges & wanting to be able to see what temperature the engine oil is at, I was drawn to the PMC analog gauge. The black option looks great with a black engine.
The ga...Læs mere - passer:
- KAWASAKI Z series
- KAWASAKI
Been looking for the funnel net or dust cover for my yoshimura tmr-mjn40 carburetor for quite some time. The ones we usually have are of low quality. found these on webike by PMC performance, the buil...Læs mere - passer:
- KAWASAKI
Although my Z900RS has its own temp gauge I wanted a second point of reference. This gauge gives me peace of mind and looks great compared to the bikes stock plastic oil filler cap. I also get a more ...Læs mere - passer:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...og mere.
The machine work is phenomenal. The fit and finish is amazing. It's a bit expensive but well worth it in regards to build quality. Love it!!Læs mere - passer:
- KAWASAKI
- KAWASAKI 750SS MACHIV (H2)
Used during engine overhaulI did a lot of research and PMC is the cheapest? Maybe.The feel is not bad and I recommend it.Læs mere - passer:
- KAWASAKI 750SS MACHIV (H2)
I think it's normal, for better or worse.Cable was immediately replaced by NGKTrouble was not there, so I gave it a high score.Læs mere - I replaced it when refresh the electrical system, and it is neither good nor bad, but normal.Exclusive Design by a Manufacturer was more effective!Læs mere
- Purchased about 6 years ago. The reason I bought it was because it was a dated OEM Product, but before it broke! I bought it before it was broken.After purchasing and replacing it, the car was in grea...Læs mere
- passer:
- KAWASAKI Z1000 (air-cooled) 72-78
- KAWASAKI Z1-R/Z1-RII 72-78
- KAWASAKI Z1 (900SUPER4) 72-78
- KAWASAKI Z1000 (air-cooled) 72-78
The raised edge prevents leakage.Læs mere - Pliers make it easy to pick up and remove the fuel hose and other items very easily.The Clip is also very strong, so there is no need to worry about leakage.Læs mere
- I really enjoy the ease of operation and the feeling of being in control. Of course, the easy Idling adjustment is great.Læs mere
- passer:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...og mere.
The OEM Tensioner does not apply the proper pressure, so we are replacing it.The replacement itself is easy, but the adjustment must be proper or it will be an Engine Blow!If you're not familiar with ...Læs mere - passer:
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z2 (750RS/Z750FOUR)
- KAWASAKI
- KAWASAKI
Compared to OEM, there are subtle differences in shape and texture that can be seen at a glance, but a beautiful engine can make it look better than a scratchy original.Læs mere - passer:
- KAWASAKI Z1-R/Z1-RII 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI Z2 (750RS/Z750FOUR) 72-80
- ...og mere.
If you use it well, it will not leak oil as much as the OEM type rubber ones. if you degrease the BALI and apply the liquid gas well, and if you reuse it, you can use it almost permanently by removing...Læs mere - It's easy to install but since the rubber body forms a slight U-shape when installed it makes it a bit fiddly to fine-tune since the force of the turning motion while adjusting doesn't transmit linear...Læs mere
- passer:
- KAWASAKI Z900 (KZ900) 76-79
- KAWASAKI Z750 (air-cooled) 76-79
- KAWASAKI Z1000 (air-cooled) 76-79
In the paper Float Gasket, the Gasoline is just leaking and the Material is here.:I bought the Rubber Packing. The price is high, but the effect is very large.Læs mere - passer:
- KAWASAKI Z1000 72-80
- KAWASAKI Z750 72-80
I bought this in January, but the carburetor would not go in at all, probably because it was hardened by the cold. Even after applying CRC or something to the insert, it won't go in. I wondered if the...Læs mere - passer:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...og mere.
Oil leak from Tachometer port is a common disease of air cooled Z.If it starts leaking, replace it with this one.The installation is a little hard, so apply more silicon grease and make sure to put it...Læs mere - Grease up is essential so that it does not become astringent.Læs mere
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING