- passer:
- KAWASAKI Z1000 (water-cooled) 03-06
It's aluminum, so it's easy enough not to cut your hands!ImpactLarge and cool.Læs mere - passer:
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100
The OEM Core guard was painted about 2 years ago, but the paint didn't last long because the rust was not removed properly and the surface preparation was not good enough. I thought about repainting i...Læs mere - passer:
- SUZUKI SV650 16-21
- SUZUKI SV650X 16-21
I purchased this product to prevent damage to the Radiator from stepping stones, etc. and for the purpose of dress-up.I like the simple design without the Manufacturer logo, so it can be defended with...Læs mere - passer:
- HONDA CB400SF VTEC
Used for CB400SF 2016It can be installed without any problem. Small Size Spanner or MONKEY is required for assembly.In the Instruction Manual, it was written that the Amiami part is supposed to be pai...Læs mere - passer:
- SUZUKI KATANA 19-21
There are other similar Core guards out there, but they're only about half the price. I drove about 100km at about 28 degrees Celsius, but of course it seems to be able to cool well while driving, exc...Læs mere - passer:
- KAWASAKI ZX-25R 20-21
I bought it because of the low price and the importance of Design.Except for the large A-TECH design in the middle, the mesh hole is large, so the protection is a little questionable, but if you are c...Læs mere - passer:
- KAWASAKI ZrX1200ZrX1200 DAEG 09-16
Although there are many manufacturers of Core Guards, you don't have to worry about the manufacturer of the exhaust system you are installing. Installation is easy.Læs mere - passer:
- HONDA X4 97-03
few in number of items (I guess it's too old for that.) The A-TECH star is cool! (FLUSH Gordon-like.)Quantity:Pair (for Left and Right) The X4 has a glossy Carbon Style design which is also a nice tou...Læs mere - passer:
- KAWASAKI ZrX1200ZrX1200 DAEG 09-16
Installed on ZrX1200 DAEGEven as an amateur, I was able to install it in less than 30 minutesI ran it after it was installedNo scare noises, no problemsThe best part is that it looks good in Parenthes...Læs mere - passer:
- KAWASAKI ZrX1200ZrX1200 DAEG 09-16
The quality and feel are both as good as Image!Since it was a gel coating, we repeated water polishing after painting with Urethane Clear!However, I feel that the price is a bit highLæs mere - passer:
- KAWASAKI ZrX1200ZrX1200 DAEG 09-16
Purchase Dry carbon twill type. The difference between NORMALCarbon and Dry carbon was not understood from HP of Manufacturer, but we made arrangements with Manufacturer in advance, but we immediately...Læs mere - passer:
- HONDA VTR250 97-21
Rubber packing something like that. I'd like to get one new Packing. You had better put on Shop.Læs mere - passer:
- HONDA X11 99-01
The pieces are very well finished but not really adapted to OEM.
I finally managed to install them but not so easily.
Next time I will know but it is a bit disappointing.
Læs mere - passer:
- KAWASAKI NINJA1000 (Z1000SX) 11-16
I installed it in NINJA 1000 made in 2016.To prevent deformation of Radiator's fins, I bought it.Installation was possible without removing Cowl. Just hook the top claw and fix it with Bolt. I lik...Læs mere - passer:
- HONDA X4 97-03
When you tried whatever you were Customing when exchanging.I installed Bolt as Gold.It will be nearly 10 years, but there is nothing wrong. "Læs mere - passer:
- HONDA CB1300 SF 98-02
Initially, I was at a loss as to KFACTORY's Guard,Since HALF COWL is A-TECH, we will use A-TECHI decided on, Gert Body I think if there is more thicknessLæs mere - passer:
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100
OEM made rust due to peeling off of coat film made of iron and purchased including Maintenance. The reason for purchasing A-TECH was decided by shape with Brand.In installation, we attached Sound-abso...Læs mere - passer:
- HONDA CB1300SUPER BOLDOR 03-13
- HONDA CB1300 SF 03-13
I was wondering what to do with the Core guard, but this was the only thing I did, I did not mind otherwise apparently changed it.I do not have any flavor and anything, I can use it comfortably.It was...Læs mere - passer:
- KAWASAKI ZrX1200ZrX1200 DAEG 09-16
I purchased it because the stepping stone to the Radiator was uneasy.Originally not being equipped on the Manufacturer side,I think that the stepping stone to the Radiator itself is stochastically low...Læs mere - passer:
- HONDA CBR1000RR 08-10
Installation requires minimum removal of One Side Cowl.If it is troublesome and you work without removing it, the Radiator will be full of scratches. Fitting, such as dimensions, is perfect.Læs mere
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING