The texture is nice and Parenthesis is good.
However, since the only connection to the Master Cylinder is the O-Ring, leakage is a concern.View Detail
Fits: BMW F700GS 06-15, BMW F800GT 06-15, BMW F650GS 08-12, BMW F800GS 06-15, BMW F800R 06-15
The Instruction Manual instructs you to remove the Release Spring in the Clutch cover, but even if you don't go that far, it will be much lighter.
If you are going to remove it, order the Gasket from the Dealer before opening the Clutch cover.
As for the performance, it is perfect, and Clutch that can only be pulled with four fingers until now is Quantity:It's light enough to be pulled with 2pc fingers and the moderation is nice and hydraulic.
However, because the amount of Stroke becomes Small, it becomes a little difficult to put in Neutral.
They do claim to fit the F800S.
The F800S has a separate handle, so the quantity of mounting positions can be adjusted.:Pair (for Left and Right) Clearance was too narrow and needed to be modified for Lever installation.
Because our model is a high line with a grip heater, the grip position and the switch position are set to Quantity.:Pair (for Left and Right) The environment cannot be moved to
Specifically, the Lever holder's Hinge part is too wide to fit between the base of the Separate handle and the SwitchCase, so the screw cannot be tightened and the Lever cannot be fixed.
In order to install it without interfering with the SwitchCase, you need to cut the MASTER part of Lever which interferes with the Hinge part and SwitchCase.
I used an iron file and shaved the interference part and installed it. It becomes the work that considerable patience and caution are necessary.
In the case of the F800S, if you take it to the Shop, they will most likely refuse to install it.
In addition, even if the wiring of the Clutch Wire part was not removed to the air cleaner box, it was possible to pass it while guiding it with a long and thin stick etc. ingeniously.View Detail
Replaced the WR with a Magura Clutch. Mirror mounting clamps are now needed to still ride on public roads.
Installation is Smooth and the product itself is almost weightless.
It's just that it's bothering me that I have to bother to prepare it in the Option setting.
You can imagine the use of the Hydraulic Clutch since it's being offered exclusively for WR, right? and
But thanks to that, I'm done with the Trial Mirror.View Detail
Because of the aftereffects of the accident, the WR250 was hydraulically converted to a beautiful girl's level of grip strength.
Quantity:I had a habit of using the 2pc finger Clutch and it was hard to use the long lever, so I decided to shorten it.
As a result, I am satisfied with Large. 1 pcSmall finger Clutch can be operated at all, and I wanted this to be included in the Kit from the beginning.
That's all, from Small Dirty Old Man.View Detail
I bent NORMAL's Lever, I thought that I could get it without ordering in Shop, it turned out to be able to buy it here. For foreign car rides, it is very difficult for parts procurement to be easy, exchange shortening at hand. Fitting has no problem at all and operability is improved. Off Lever of one car exceeds 5000 yen, although a slight dissatisfaction remains, it is easy to procure Route □.View Detail
It is a famous German magra in the bicycle world
I feel that reputation is not very good in Motorcycle circles.
Because it is Radial, it has a slight angle
It is hard to get in the way of Knuckle guard.
Brake fee Ring has Piston diameter 11 mm and Small
I think that there are plenty of fun. Thanks and messed up
I felt the air bleeding would not end even when it passed.
In KLX even people of Off-roadMain 12 mm (OEM+1mm) I also think that it is good.
Banjo bolt is under the MASTER.
Since this does not appear with an off car, there is a possibility that problems may come out depending on circumstances.
Large There are problems,
You can choose whether Reserver tank is sold separately or separately. This is fine.
However, Standard has Elbow for separate expression
I need to remove this person and install the direct attachment tank
This Elbow is too hard and can not be removed anything in any way
I tried to remove it while twisting with Pliers while curing it was torn out.
As a result, Elbow remains remained in the hole was removed while carefully melting it with Hot knife.
Also, although it is a drawback related to direct attachment, let the O-ring bit in the mounting hole.
This O-ring does not fit snugly into the groove and it is fixed
Even if it is pushed into a hole, it will repel and come back.
While pushing it by Tank, we tightened Screw by regulation Torque and crushed it,
Seal will be done by keeping the collapsed condition to a certain extent
In that state, there is a gap like picture 2.
This is the story I heard formally from an agency.
I am worried about whether Seal is really done.
Also, although the angle of Tank can be changed,
Besides Lever's angle, there is interference with the Breeder plug and there is not much flexibility.
Finally, when I inquired this agency to the agency,
If you are worried about doing it yourself, I was able to proceed with Pro shop
When requesting repair of the product of another Magura previously purchased at a store,
There is something told me to send to the agency.
When problems arise in the future, I will be concerned about the location of responsibility.
View Detail
It is attached to the VTR 250.
Because it is a car that is playing Gymkhana, Brake wants severe to work.
The price is smart compared to other Manufacturers, but I chose again as I used to use it before..
Tank is sold separately, so purchasing is necessary.View Detail
Fits: BMW F700GS 06-15, BMW F800GT 06-15, BMW F650GS 08-12, BMW F800GS 06-15, BMW F800R 06-15
Purchased by acquiring information that it can also be attached to NUDA sharing Engine, Frame with F800Series.
Thanks to easy-to-follow instructions with photos, we were able to replace it in about 2 hours' work.
From the heavy Wire type Clutch, which seems to cry when you get caught in traffic jams, semi-clusters are dramatically lighter easily.
However, it looks like a barely GERMANY item. There is no glitter like Italian Brand, there is no Custom feeling to enjoy with the view.View Detail