EX rørmateriale : Titanium
EX rørdiameter : 42.7Φ
Tail Pipe Yder Diameter : 60.5Φ
* End Baffle er allerede installeret til lyddæmperen, når den sendes.
* Du skal udskifte det bageste trin til en enkelt type for at installere dette produkt. Når du installerer dette produkt, skal du klippe (behandle) rammen af tandem-trinområdet.
* Det kan være nødvendigt at udskifte blinkeren afhængigt af blinkertypen.
* Filterdæksel og afløbsbolte skal ændres til flade typer. Fladt dæksel og aftapningssæt er inkluderet i EX Exhaust Kit. Udskift dem, når du installerer udstødningen.
* Kan bruge NITRO RACING Tandem Step Kit Type 2. (Køretøjer, der allerede har NITRO RACING Tandem Step Kit 1, kan opleve forstyrrelser mellem lyddæmperen (øvre) og tandem trin kit på grund af svejse fast placering af monteringspladen.)
* Udstødningsbeslaget er ikke i overensstemmelse med OEM-type bagophæng. Den er i overensstemmelse med laydown mount med M6 skruehullet struktur.
* Billedet er kun til reference. Det viste billede kan afvige fra det aktuelle produkt.
[Silencer Specification]
・Thickness: Φ90
・Silencer material: Aluminum
[exhaust pipe specs]
・Assembly method: 4in1
・Tail pipe outer diameter: Φ60.5
・Exhaust pipe diameter: Φ42.7
・Exhaust Pipe Material: Titanium
[Components]
・Assembly part
・Tail pipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
・Exhaust pipe per vehicle
[Maintenance Data]
・Drain bolt: Manifold section needs to be detached
・Change oil filter: Manifold section needs to be detached
・Center stand: Not available
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
Never remove the exhaust baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
It is necessary to change to a single type rearset.In this case, it is necessary to cut off the frame of the pillion step when you replace the stock one with this product.
Depending on the type of blinker, it may be necessary to replace the blinker.
It is necessary to change the filter cover and drain bolt to a flat type.The Flat Cover & Drain KIT is included in the Exhaust Kit and should be replaced when the exhaust is installed.
It is compatible with NITRO RACING Pillion Step KIT Type2.(As to the vehicles already equipped with NITRO RACING Pillion Step KIT Type 1, there is a rare case of interference between the upper part of the silencer and the Pillion Step KIT due to the welding position of the mounting plate.)
The exhaust bracket is not compatible with the stock rear suspension mount.Compatible with laydown mount adaptation with M6 screw hole construction.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.