Swingarm Protectors
Disse svingarmbeskyttere passer til Yamaha R25'14-, MT-25'15- og R3'15-modellerne i bagspindlen og giver ekstra beskyttelse til swingarmområdet og svingarmkomponenterne.
Nem at installere, gliderne holdes på plads takket være der forbinder gevindspindelstang, der forbinder den ene side til den anden, sikrer at kittet er sikkert på plads. De hjælper med at holde de kernekomponenter, der findes i / på swingarmområdet, såsom bagbremsekaliper, skive, baghjul og svingarm løftes op af jorden, ude af skader i tilfælde af et sammenbrud.
Bemærk: Paddock stativ spoler / Paddock stativ (som set i billeder) er ikke inkluderet, men er tilgængelige separat!
[Referencer]
Swingarm Protector
Disse Swing ArmProtector til Yamaha R25 '14 -, MT - 25 '15- og R 3 '15 - MODEL Passer til bagspindel og beskytter også Swing Arm area og Swing Arm dele.
Det er let at installere, glideren er forbundet med en skruetype spindelbjælke, så det forbinder One Side til den anden side sikrer, at sættet er fastgjort på plads. Bremsekaliper, skive, baghjul og som med svingarm løftet fra jorden hjælper det Hold CoreComponents i / ved Swing ArmArea i fare ved Crash-tid.
Bemærk venligst: Paddock Stand Bobbin / PaddockSTAND (Det er beskrevet på billedet) Selv om den ikke er inkluderet, er den tilgængelig separat.
Swingarm Protectors
These swingarm protectors, for the Yamaha R25 '14-, MT-25 '15- and R3 '15- models fit into the rear spindle and provide added protection to the swingarm area and swingarm components.
Easy to install, the sliders are held in place thanks to there connecting threaded spindle bar, connecting one side to the other ensuring the kit is secure in place. They help keep those core components found in / on the swingarm area such as the rear brake caliper, disc, Rear sprocket and swingarm lifted up off the ground, out of harms way in the event of a crash.
Please note: Paddock stand bobbins / Paddock stand (as seen in the pictures) are NOT included but are available seperately!
[Translation]
Swingarm Protector
These swingarm protectors for Yamaha R25'14-, MT-25'15-, and R3'15- models fit the rear spindle and provide additional protection for the swingarm area and swingarm components.
Easy to install, the sliders are connected by threaded spindle bars, so connecting one side to the other ensures that the kit stays securely in place.It helps keep the rear brake calipers, discs, rear sprocket and core components in / on the swingarm area out of harm's way in the event of a crash, as if the swingarm were lifted off the ground.
Caution: The paddock stand bobbin / paddock stand (shown in the photo) is not included, but is available separately.