Motorforskydning : 86cc
Manuelt kobling 4-gear (skift mønster : 1-N-2-3-4)
[Inkluderede dele]
Kick Pedal
Shift Pedal
Karburator (Φ16)
Manifold
CDI
Regulator
Blinker relæ
Antændelsespole
Ledninger (for MONKEY)
* Det er muligt at bruge OEM-selen, når den monteres på 12V-køretøjet, men det kræver udskiftning af motorens forbindelsesdel med kugleplinten.
* Det er meget praktisk at bruge [Ca885] 12V motor konvertering sele ved montering på 6V køretøjet. (Det kræver ikke udskiftning af seler, da det er muligt at bruge 6V OEM-selen.)
* Det kræver udskiftning af de elektriske dele som batteri og pære til 12V ved udskiftning på 6V-køretøjet.
* Den medfølgende manifold er til MONKEY. Der er tilfælde at det ikke kan monteres, og det kræver behandling i et køretøj (som CHALY og CUB).
[Specification]
・Displacement: 86cc
・Manual clutch 4-speed (shift pattern 1-N-2-3-4)
[Components (for MONKEY)]
・Kick Pedal
・Shift pedal
・Carburetor (Φ16)
・Manifold
・CDI
・Regulators
・Blinker relay
・Ignition coil
・Main harness (Please choose one from the options)
*Regardless of the harness selection, the set contents are parts for Monkey.
*For 12v vehicles, the stock harness can be used, but the coupler for the engine connection must be replaced with a crimp terminal.
*When installing on a 6V Vehicle (part number: ca885)12v engine conversion harness is very useful.(The 6v stock harness can be used, so there is no need to change the harness)
*When installing on a 6V bike, it is necessary to convert the electrical system such as battery and valve to 12V.
*The attached manifold is for Monkey, so some vehicles (Shari, Cub, etc.) may require modification and may not fit.
*If the breather pipe of the engine body is installed between frames, the pressure inside the crankcase will increase and oil will leak out, which is very dangerous.Check the condition of the breather pipe after engine installation before starting the engine.
*Tanaka Trading does not exchange products after shipment.Please check the engine model carefully before purchasing.
*The sprocket attached to the engine is for checking the engine start.Sprockets are not replaced.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.