Skift fra standard enkeltstemplet til brembo 2 stempel.
Control Det er en designfokuserende betydning.
Pad er iført uden bearbejdning.
Kaliper vil forstyrre hjulnavdelen, da der er individuelle forskelle, skal du klippe Caliper Body interfering med Grinder osv.
Disc Plate vil være slukket til forsiden med farve på billede 5 i figur 2.
Billede 1 i fig. 1 Støttekrop bør monteres på bilens krop, inden montering af Caliper, efter installation af Caliper installationsprocedure.
Venligst skift bremseslange efter kundens kropsmiljø.
På samme måde som OEM med bremseslange, standard bilkropstilstand, vil længden være omkring 450 mm.
Vi beder om din installation af dig selv.
Changed from standard single piston to Brembo 2 piston.
It is designed for controllability.
Pads can be installed without any modification.
The caliper will interfere with the wheel hub, there are individual differences, please cut the interfering part of the caliper body with a grinder.
The disc plate is off-set on the front side with the color of Figure 2 in Image 5.
Please install the main body of the support to the vehicle body before installing the caliper, and install the caliper after installing the support.
The brake hose should be replaced according to the environment of the customer's vehicle.
If you use the standard brake hose, the length is approx. 450mm.
Please install the product by yourself.