Skift til IC kontrol. Hurtig opladningsfunktion tilføjet!
Vandtæt USB-oplader udviklet til 12V Motorcykel.
Regn i den forbundne del, hvor kun vand kommer ind ved at forlænge bælgen (vand) Det er svært at komme ind.
Opladning til forskellige terminaler kan gøres nemt når som helst hvor som helst.
Det svarer til forskellige terminaler som iPhone, iPad, Smartphone Vi elsker Le Camera. (Op til 2,5 A)
Kortslutningsbeskyttelsesfunktion.
Ved tilslutning er Wiring 's Plus, Minus tilsluttet i omvendt, det er ikke kort, det kan bruges normalt.
En robust Aluminium Cut-out Body og høj teksturoverfladebehandling giver en følelse af kvalitet.
Alto's Cut-out Body opnår også høj vandtæt natur med god tekstur og god brugervenlighed.
Indikator let at forstå displayet.
Når du tilslutter terminalen, bedes du ved at oplade, kontrollere strømafbrydelse, indikatorlys, blinke.
Energibesparende type.
Da standbystrømmen på tidspunktet for ikke-opladning er meget lille, er byrden kun 0,1 mA eller mindre, selvom den er tilsluttet.
Batteriets minimale ladningsbeskyttelsesfunktion.
Opladningen stopper automatisk, når batteriet bliver 12 V eller mindre med spændingsdetekteringsfunktionen. Når batteristatusen genopretter, starter opladningen.
SMARTCHARGE funktion.
Der er en funktion til at detektere tilstedeværelsen eller fraværet af udgang fra terminalen, og næsten ingen batteri elektrisk strøm bruges, når terminalen er afbrudt.
Hurtig opladningsfunktion.
Hurtigladning MODE funktion af QC 2.0. Når batteriets batterilevetid er mindre end 30% eller mindre, bliver det hurtig opladningstilstand, når du bruger kabel til hurtig opladning.
[LED display]
? Unlit: Batterispænding er 12,2 V eller mindre. Opladning til terminalen er umulig.
? Rød farve blinker: Batterispænding 12,3 V? 12,5 V. Påkrævet Motorstart og batteri CHARGE.
? Grøn farvebelysning: Batterispænding er 12,6 V eller mere, opladning til terminalen er god.
Change to IC control.Quick charge function added!
Waterproof USB Charger developed for 12V motorcycle.
By extending the bellows, rain (water) is less likely to enter the only connection point where water enters.
It is possible to charge a variety of devices and can be charged anywhere and anytime.
Compatible with various devices such as iPhone, iPad, smart phone and wearable camera.(Up to 2.5A)
With short circuit protection.
Even if the plus and minus of the wiring are connected reversely at the time of installation, it does not short-circuit and can be used normally.
The sturdy machined aluminum body and high quality surface treatment create a sense of luxury.
It has a good appearance and user-friendly functions, and its machined aluminum body is also highly waterproof.Equivalent to IPX8
Easy-to-understand indicator display.
Check charging and power shortage when the device is connected, and inform by lighting and blinking of the indicator.
Energy saving type.
Since the standby current when the battery is not charged is very small, the burden is less than 0.1mA even when the battery is connected.
Battery minimum charge protection.
The voltage detection function automatically stops charging when the battery falls below 12V.When the battery condition is recovered, it will start charging.
Smart Charge Function.
It has a function that detects the presence or absence of the output from the device and uses almost no battery power when the device is not connected.
Quick charge function.
With QC2.0 quick charge mode function.When the battery status of the device is less than 30%, it will be in fast charge mode.For fast charging devices and cables.
[LED indicator]
・Lights-out: Battery voltage 12.2V or less.The device cannot be charged.
・Blinking in red: Battery voltage 12.3V to 12.5V.Requires engine start & battery charge.
・Green light: Battery voltage 12.6V or higher.Good charging to the device.