Bikini kappe af noget afrundet Standard Design.
Du kan få høj udbedrende effekt og frygtløs Styling. Normal lampe kan monteres med Bolt On.
LightQuantity: Par (for venstre og højre) Gummibøsning, nedre Rigid mount realiserer sikker fiksering på tre steder. Cow Body er Materiale: FRP, Polycarbonat Screen Standard Udstyr.
Skærmen er [Farve] Klar, [Farve] Du kan vælge mellem to slags røg.
This bikini cowl has a standard design with a slightly rounded shape.
High rectification effect and fearless styling can be obtained. Bolt-on installation to the stock lights.
The light is securely fixed in place with the rubber mounts on both sides of the light and the lower rigid mount.
The cowl body is made of FRP and comes standard with a polycarbonate screen.
The screen can be selected from clear or smoked.
Sporty mini cowl with standard design that boasts a wide lineup and high quality.
The slightly rounded shape of the bikini cowl can be installed on any type of vehicle without any discomfort and enhances the original styling of the vehicle.
It also reduces wind pressure from the shoulders to the torso to support comfortable high-speed driving.
The main body of the cowl is made of multi-layered FRP for durability, and the back side is finished with a surface matte finish.
The back of the cowl has a sapphire matte finish and can be painted with acrylic urethane paint in Japan.
The screen can be selected from clear or smoked, and is attached to the cowl body with highly durable stainless steel screws, polycarbonate washers and lock nuts.
Bolt-on installation is possible with the car-specific design
The cut lines and mounting brackets are set for each car model, and installation can be done by bolt-on.
No special tools are required for installation. No special tools are required for installation.
Secure fixation with 3-point mounting system
Rubber mounts on both sides and rigid mounts on the bottom provide secure fixation at 3 points to reduce unpleasant vibrations and provide stable driving even at high speeds.
All factory colors are clear coated, and the backside is also painted in the same color.
Please check the contents before installing the parts.
Instruction Manual, Body Mounting Bracket Set, Screen Screw Set (Blue)
Please prepare the tools necessary for installation.
Combination wrench or wrench (size 14mm, 13mm, 12mm, 10mm, 8mm)
Hexagonal wrench (size 4mm, 3mm)
Blanket (to protect the bike body)
Scissors or nippers
Install the mounting rubber to the cowl.
Once the inside collar is removed, insert the collar after the mounting rubber is installed.
The mounting rubber is included in the bike body mounting bracket set.
Install the screen to the cowl.
Terminally assemble the screen screws into all the holes and tighten them evenly.
Screen screws are included in the screen screw set (blue).
The lock nut is designed to prevent loosening, so it is sufficient to tighten it to the extent that there is no rattling after checking by hand.
Over-tightening may cause deformation or cracking of the screen.
Remove the screw that holds the light rim in place.
Unplug the coupler and remove the light unit.
Remove the bolts securing the headlight and replace them with the supplied side mount bolts.
The side mount bolts are included in the bike body mounting bracket set.
To prevent misalignment of the optical axis, work on one side at a time.
Insert the coupler and install the headlight unit in the original location.
Tighten the screws on both sides.
Tighten the included bracket.
Fasten the bracket temporarily, so that the cowl can be aligned later.
13. Put the cowl on.
Align the holes on the left and right sides of the light with the holes on the left and right sides of the cowl.
Align the brackets so that they are inside the holes at the bottom of the cowl.
Install the bolts on both sides to secure the cowl.
The left and right bolts are included in the body mounting bracket set.
Align the holes on the bottom of the cowl with the brackets, and temporarily fix with the bolts and nuts provided.
Adjust the clearance between the light rim and the cowl around the light to set the position.
Fasten the bolts on the body side of the bracket.
Fasten the bolts on the cowl side.
Installation is complete.
Turn the handlebars to the left and right to check for interference.