Med position
Brug 24 lysstyrke med høj lysstyrke
[Produktindhold]
・ LED-tilpasset Zing board Sekventiel type Assy (for Front Blinker 3-wire Type 180 ° Pin Type) X2
・ Dedikeret Lins X 2
· Tappeskrue (3x12) X4
* Selv om vi laver overholdelse af kriterierne for godkendelse / afvisning af passagerkontrol, skal du forstå, at grundlæggende bedømmelse af passagerkontrol godkendelse / afvisning i den nuværende tilstand vil blive overladt til den rystede inspektionschef.
positional
Use of 24 high-brightness LEDs
[Kit Contents]
・LED customizing board sequential type assembly (3-wire 180° pin type for front indicator) x 2
・Dedicated lenses x 2
・Tapping screw (3 x 12) x 4
*There may be changes in product specifications due to the manufacturer's reasons.
■□■Regarding Sequential blinker specifications■□■
1. cycle 1sec-0.5sec
(More than 60 times per minute and less than 120 times per minute / Product flashes 73-75 times per minute)
2. the following conditions must be met when flashing light sources are produced by chain lighting
(1) Each light source remains lit until the end of the ON cycle after it is turned on.
(2) The lighting of the series of light sources occurs uniformly and progressively from the inner to the outer edge of the apparent surface.
(3) No repetitive alternation in the vertical direction (e.g: A single continuous line (without waves).
(4) The variation ends within 200ms after the start of the ON cycle.