Misty 64Hand Bent til Z400 FX, fuld af fine Kodawari.
Jeg lavede udstødningsrør så længe som muligt for at slukke drejningsmoment ..
Bøjet skønhed af udstødningsrøret!
Det er et vidunderligt håndværk!
■ Kodawari Point
I modsætning til ZEPHYR er den del af Stay-systemet, der hænger fra udstødningssystemet, et enkelt ophold, ikke to.
Det er fremstillet til at blive installeret på den endelige type Z400FX E4 fodnøgleplade.
Dette gør det muligt at knytte FXSeries til alle typer.
Naturligvis svarer det til al den genimporterede bil.
Z500 · Z550 · 400J · ・ ・ Alt er OK!
Desuden!
Placeringen af udstødningssystemets hængende ophold! Og formen! En lille skrå kommer fra før.
Dette skyldes, at hvis det hængende opholds position er for bagud, ser udstødningssystemet kort ud og bliver super optaget.
Den samlede længde bestemmes ved at se på balance.
Imidlertid bestemmes opholdets position af Frame.
Så jeg stillede opholdet til at blive så tæt som muligt, og jeg viste Tail Pipe god parentes.
Rørets position kommer sidelæns fra monteringsdelen!
Dette er en stor off med et stort snit.
Denne udsøgte clearance og balance!
Det er kommet smukt ud Balance godt!
Afstand med bilens karosseri er også en stor ting.
Monter så nøjagtigt som muligt langs kroppen.
Og se alle balancer, og juster clearance.
Følelsen parallelt med svingarmen er forfriskende og cool.
Hvis du indstiller vinklen til Pillion Footpeg and Plate, vil balancen være bedre.
Selvom det er et rør, der er lanceret fra forsamlingssektionen, er det fremstillet med lidt ekstra bredde, så det kan svare til Aluminium Swing Armetc. Udenfor Misty.
64 håndbøjet udstødningssystem er bygget med stor omhu!
Jeg ville meget gerne!!!
Strømmen hæves også med SMART 64 tærter!
Forex ryttere!
Hvad synes du?!
Forsendelse af SSilencer ved forsendelse (Lyddæmper er aftagelig).
MISTY 64 hand bent for Z400FX with a lot of detail.
We made the exhaust pipe as long as possible to get more torque.
The beauty of the exhaust pipe bends!
Great craftsmanship!
■Points of emphasis
The hanging brackets of the exhaust is different from the Zephyr, it is not a double bracket but a single bracket.
This kit is designed to fit to the step plate of the last model Z400FX E4.
This allows the FX series to be mounted on all types.
Of course, we also deal with all reimported bikes.
Z500, Z550, 400J... All OK!
And more!
The position and shape of the exhaust suspension bracket comes out from the front at a slight angle.
This is because if the position of the suspension bracket is too far back, the exhaust will look short and ugly.
The overall length is determined by the balance.
But the position of the bracket is determined by the frame.
So, we put the bracket as far forward as possible to make the tail pipe look cool.
The position of the pipe coming out to the side from the merge collector is the key!
This perfect clearance and balance!
It's coming out beautifully balanced!
Clearance to the body of the bike is also important.
We fit it as snugly as possible along the body and adjust the clearance to balance everything.
The parallelism with the swingarm is cool and clean.
The angle should be aligned with the angle of the pillion step plate for better balance.
This pipe comes up from the merge collector, but it is made with a little extra width to be compatible with aluminum swingarms other than MISTY.
64 hand-bent exhaust that has been painstakingly crafted!
Come on!!!!
64 for more power!
For FX riders!
What do you think?!!
Factory fitted S silencer (Silencer is removable).