Tænd altid for blinklygten og vend den i positionslygte.
Ingen pæreudskiftning er påkrævet.
Ud over at forbedre synligheden fra andre køretøjer har det også en AttachmentLamp-effekt.
[Multifunktion · Høj ydeevne]
Valgbar belysningstil
Da jeg tog Blinker ud, tændte jeg for belysningsstilen Style på den modsatte side af drejeretningen "Sluk" "Halve" "Vedligehold" Du kan vælge mellem tre typer. Derudover er positionsfunktionen slået fra (NORMAL stat) Det er også muligt at indstille.
Lys blødt op
Når Blinker blinker og lyser op igen, ændrer glat lysstyrken for at give en atmosfære af høj kvalitet.
Du kan justere lysstyrke og mørke, som du vil.
[Ingen udveksling krævet]
Blinker-afbryder On / Off læses, og output til Blinker styres automatisk af Micro-computeren.
Da Position dedikeret kredsløb er unødvendig, STD Blinker (Enkeltpære) Du kan tilføje Position-funktion, som den er. Der er ikke noget problem, selvom du udskifter pæren med LED-pæren.
[Høj udholdenhed]
Vandtæt (Svarer til IP66) Design
Der er ingen bekymring for regnvådhed, svigt i stærke vibrationer, Hovedenhed for fast dannelse.
Bedømmelse af margin
Kan bruges til forskellige brugerdefinerede.
[Det er let at installere.]
Fordi det leveres med ledningsføring til kobling til en kompatibel model separat, kan den let installeres uden tøven.
[Om Universal]
Produktnummer 1002Kit fungerer også som UniversalKit.
All Wiring er en Round Bullet-terminal, og dette sæt leveres også med terminaler, som du kan bruge, når det er universal. Køretøj med positionsfunktion fra NORMAL (Dobbelt lampe) Når du bruger med, kan det bruges ved at frakoble positionskredsløbet. Lille type 2 PCoupler, der blev brugt mest i Honda-bilen siden omkring 2008 (Venstre er orange, højre er lyseblå) Bilen kan også bruge L1001 Kit.
Front blinkers to be turned into position lamps with constant lighting
There is no need to replace any light bulbs.
In addition to improving visibility to other vehicles, it also has an accessory lamp effect.
[multifunctional, high-performance]
Selectable lighting style
When the indicator is turned on, you can choose from three lighting light styles: "off, " "half off, " or "maintain" on the side opposite the direction of the turn.It is also possible to set the position function off (stock state).
lighted by lightning
Produces a high quality atmosphere by changing the luminance smoothly when the blinker flashes and turns on again.
You can adjust the brightness and darkness as you like.
[No replacement needed]
Reads the indicator switch on / off and automatically controls the output to the indicator with a microcomputer.
Since a dedicated circuit for the position is not necessary, the position function can be added without changing the stock indicator (single bulb). It does not matter if the bulb has been replaced with an LED bulb.
[high durability]
Water-resistant (IP66 equivalent) design
The main unit is solidly built to prevent damage from rain and strong vibrations.
Generous ratings
It can be used for a variety of custom applications.
[easy to install]
The coupler-on wiring is included for each compatible model, so you can easily install it without hesitation.
[About Universal]
Part number 1002 kit also serves as a universal kit.
This kit has all the wires wired with round connectors, and also comes with terminals for general use.For use in vehicles with a stock to position function (double bulbs), the position circuit can be disconnected. The L1001 kit is also available for small 2-pin couplers (orange on the left, light blue on the right), which have been used on many Honda vehicles since around 2008.