■ HONDAThree-dimensionelt emblem (Stor)
[Produktindhold]
・ Emblembeslag X1
· GrommetX2
[Størrelse] W185XH45mm
[Materiale / Material] Materiale: Rustfrit stål
[Beslagstykkelse] 2.0mm
[Oprindelsesland] Japan
* Ved installation monteres M10-bolt (2 point) På det tidspunkt vil styrken på opholdet gå tabt på grund af boltens tilspændingsmoment, og staget bliver vridet, og det samme fænomen vil opstå, når det løsnes. For at reducere friktionsmodstanden anbefaler vi, at der fastgøres med fedt eller roset.
* Efter installationen skal du dreje styret helt til højre og kontrollere, at det ikke forstyrrer kappen osv. Hvis det forstyrrer hylsteret, løsnes bolten igen og justeres.
■HONDA 3D emblem (large)
[Set components]
・Emblem bracket x 1
・Grommet x 2
[Size] W185 x H45mm
[Material] Stainless steel
[Bracket plate thickness] 2.0mm
[Country of manufacture] Japan
*When installing, secure with M10 bolts (2 points).In this case, the strength of the bracket is outstripped by the tightening torque of the bolt, causing the bracket to sag.The same phenomenon also occurs when loosening.Therefore, we recommend using grease, rosettes, etc. to secure the bolt and bracket during installation to reduce frictional resistance between the bolt and bracket.
*After installation, turn the handlebar all the way to the left and right to confirm that there is no interference with the cowl or other components.If there is interference with the cowl, loosen the bolts again and make adjustments.