Key Star's carburetor brændstofjusteringssæt indeholder næsten alle de nødvendige dele til reparation og justering af karburatoren.
Nåleventil, tomgangsskrue (Luftskrue) , Float Chamber Gasketetetc. Imidlertid er der en rig flammehæmmende komponent.
Pilot Jet er 3 størrelse, Main jet er 6 størrelse, Jet nål er 4 størrelse.
Rubber's Needle Valve bruger "AANeedle", som er en prisvindende SUPERNeedle.
Dens fantastiske ydeevne overgår langt OEM-produktet.
Jet sæt til Tune up, som tidligere har været kommercielt tilgængeligt, er tildelt Størrelse osv. interval.
For eksempel er det 5. spring eller 10. jump.
Jet-sætet til det brændende sæt er imidlertid ikke et arrangement af intervallet osv. Osv.
Kombineret med Jet-nål er det størrelsesdesign, der kan ændre luftbrændstofforholdet effektivt og fint.
Første brug af brandtilstandssættet er Fejlfinding (Fejlfunktion forbedring) er.
Det bruges til reparation af motorcykel, der har problemer med brændstofforsyningen.
For den grundlæggende retning, for at gøre luft / brændstof-forholdet stort, skal både Pilot Jet, Jet-nål, Main Jet flyttes i L-retningen, og omvendt, for at reducere luftbrændstof-forholdet, skal du bevæge dig alle i R-retning Du bør.
Kombinationen af L, S og R vil imidlertid variere afhængigt af hvilket område af lav hastighed, mellemhastighedsområde eller højhastighedsområde, du vil ændre.
Det kan siges, at dette er den virkelige glæde ved CarburetorTuning.
En anden brug af brandklasse Kit er Tune up of Motorcycle (Præstationsforbedring) er.
Da Carburetor ikke er en enhed, der producerer strøm af dig selv, selvom du bare justerer Carburetor, kan du ikke forvente meget af effekten af Tune up.
Vær opmærksom på, at når du tuning op ved at udskifte delene før og efter motor og motor, vil ydelsen blive forbedret ved at justere karburatoren, så den passer til dem.
Hvis du f.eks. Forsøger at forbedre motorens ydelse ved at udskifte den med et luftfilter, der øger den luftmængde, der passerer, eller et udstødningssystem, der reducerer udstødningsmodstanden, vil tilstanden for den blanding, der kræves af motoren, naturligvis afvige.
Så karburatorjustering kommer ind.
Det er Kitaki Kit, der let fylder det.
Keyster's Carburetor Tune-Up Kit includes almost all the parts needed to repair or adjust your carburetor.
Needle valves, idle screws (air screws), float chamber gaskets, etc., but the most distinctive feature is the wide variety of fuel control parts.
There are 3 sizes of pilot jets, 6 sizes of main jets and 4 sizes of jet needles.
The rubber needle valve is made of "AA Needle" which is the super needle that won the invention prize.
Its amazing performance far surpasses that of stock products.
Conventional jet sets for tune-up are distributed equally in size.
For example, it skips by 5 or 10.
But the jetsets in the fuel tune kit are not evenly spaced.
In combination with the jet needle, the size is designed to change the air-fuel ratio effectively and precisely.
The first use of the fuel tune kit is for troubleshooting.
For use to repair motorcycles with fuel supply problems.
The basic direction is that the pilot jet, the jet needle and the main jet should all be moved in the L direction to increase the A / F ratio, and all of them should be moved in the R direction to decrease the A / F ratio.
However, the combination of L, S, and R will be different depending on how you want to change the range of low, medium, and high speed.
This is one of the best parts of carburetor tuning.
Another application of the fuel tuning kit is to tune up the motorcycle (performance improvement).
However, the carburetor is not a device that generates power by itself, so no matter how much you adjust the carburetor, the effect of tuning up is not expected.
Please note that the performance will be improved by adjusting the carburetor to fit the engine and the parts of the engine front and rear when they are replaced and tuned up.
For example, if you try to improve the performance of the engine by changing the air filter to increase the amount of air passage or the exhaust to reduce the exhaust resistance, the mixture conditions required by the engine will naturally be different.
This is where carburetor adjustment comes in.
This can be easily met with a fuel adjustment kit.