Det blev godt modtaget "Triple tree" Lineup som Type 2 med ændret Boltposition for at stramme gaffeldelen af Top Bridge!
Ved at ændre boltepositionen kan K-FACTORY Φ43 Universal styresæt bruges.
Når du kører i høj hastighed med højt greb (Kredsløb) En af faktorerne til sløring i Triple-træet kan være utilstrækkelig styrke.
Selvom det er lidt lindret af stabilisator og styreapparat, er det ikke en grundlæggende løsning.
NORMAL indser høj stivhed og let vægt ved at skære ud tredobbelt træstamaksel, Under beslag med aluminiumsbarbering, hvilket er uroligt ved stivhed.
Offsetmængde er også 30 mm som standard, 28mm · 32mm kan vælges ved at bruge Option farve, 3-positions valg er muligt.
Det er muligt at justere i henhold til Riding baseret på den samme dimension som OEM.
Gaffelhøjde er 205 mm, Gaffelkrampdiameter er Φ 43mm, OEMFork samt OHLINS opstillet gaffel osv. Φ 43mm Gaffel kan installeres.
Vi har to skruehuller i den forreste del af Underbeslaget, så samlingen til forgrening af Bremseslangen mm kan installeres. (M6XP = 1,0 skruehøjde: 46 mm)
Stammøtrik, styrestolpe er også inkluderet i begyndelsen.
Styrestang og styrestangslås er også tilgængelige og justeres til offset.
Leje · Støvforsegling er også inkluderet.
Finisherne er sort anodiseret og sølvanodiseret.
The bolt position to tighten the fork part of the "Triple Tree" top bridge was changed, and it is lineup as Type2!
By changing the bolt position, it is possible to use K-FACTORY Φ43 universal handle kit.
One of the reasons for shaking at high speed (circuit) with high grip tires is the lack of strength of the triple tree.
Sway bar or steering damper can reduce the problem slightly, but it is not a fundamental solution.
The stock triple tree with the little concern of rigidity replaced with a stem shaft and under bracket are machined aluminum to reduce the weight and realize stiffness of the stock triple tree.
The standard offset is 30mm, and by using the optional collar, 28mm and 32mm can be selected, and 3 positions can be selected.
It is based on the same dimensions as the stock and can be adjusted to suit your riding style.
The fork pitch is 205mm, the fork clamp diameter is Φ43mm, and it is possible to install not only stock forks but also Φ43mm forks such as Ohlins upright forks.
There are two threaded holes on the front part of the under bracket so that a joint for splitting the front brake hose can be attached.(M6 x P=1.0 Screw pitch:46mm)
Stem nut and handle post are also machined.
Handle stoppers and handle locks are also available and can be adjusted to suit the offset.
Bearings and dust seals are also included.
Available in black anodized aluminum and silver anodized aluminum.