Det kan prale af fremragende luftbeskyttelse såvel som en dedikeret Bikini-ku. Ydersiden af modellering, der slipper en lineær overfladekonfiguration som Kawasaki i en Z900RS-afrundet stjerne ring.
OEM-farvefinishen for hver model er også foret i overensstemmelse med Z900RS, og den understøtter forskellige grafik såsom ildkugle, Tigerfarve.
Med Bracket.Bolt-on Design.3-punktsophæng til Reserver-tank fjernes Chatter og Wobble selv ved kørsel med høj hastighed.
This exclusive bikini cowl features Kawasaki's signature straight lines and is shaped to fit the round stance of the Z900RS.
It is not only for the exterior, but also for the excellent air protection.
The stock color finish of each year matching Z900RS is also lined up for Z900RS, and it corresponds to various graphics such as the fireball and the tiger color.
Bracket for reservoir tank included.Bolt-on design.
The 3-point mount eliminates chattering and rattling even at high speeds.
■Masqueroad
High grade bikini cowl specially designed to match the shape of each model.
It enhances the individuality of the vehicle and gives it a more radical and intrepid style.
This is the best bikini cowl model made by Chic Design in terms of performance and quality.
The cowl body is made of multi-layered FRP for durability, with a matte finish on the back surface.
Compatible with Japanese stock color coating with acrylic urethane paint.
The windshield can be selected from clear or smoke and stainless steel screws, polycarbonate washers and lock nuts are used to attach the windshield to the cowl body.
The light is securely fixed in more than three places including the rubber mounts on both sides of the light and the lower mount to prevent uncomfortable vibration.
A unique front face with an exclusive design
Since it is designed exclusively for each model, it is not only bolt-on, but also shows the silhouette with a sense of unity.
No special tools are required for installation, and it is easy for anyone with general tools and maintenance knowledge.
Installation procedure
1
Please check the contents before you start to install the parts.
・Cowl
・Windshield
・Instruction Manual, Vehicel Body Mounting Bracket Set, Windshield Screw Set (Blue)
2
Please prepare the necessary tools for installation.
・Combination wrench or spanner (size 14mm, 13mm, 12mm, 10mm, 8mm)
・Hexagonal Wrench (Size 4mm, 3mm)
・Phillips screwdriver
・Blanket (to protect the vehicle)
・Scissors or nippers
3
Attach the mounting rubber to the cowl.
Once you remove the collar from the inside, insert the collar after installing the mounting rubber.
The mounting rubber is included in the vehicle mounting bracket set.
4
Attach the windshield to the cowl.
Temporarily assemble the windshield screws in all holes and tighten them evenly.
Windshield screws are included in the windshield screw set (blue).
5
Since the lock nut is designed to prevent loosening, it is sufficient to tighten the lock nut to the extent that there is no rattling after checking by hand.
Please note that over-tightening may cause deformation or cracking of the windshield.
6
Remove the screw that holds the light rim in place.
7
Pull out the coupler and remove the light unit.
8
Remove the bolts securing the headlight and replace with the supplied side mount bolts.
Side mounting bolts are included in the body mounting bracket set.
9
The work is done one side at a time to prevent misalignment of the optical axis.
10
Insert the coupler and install the headlight unit in the original place.
11
Tighten the screws on both sides.
12
Fix the included bracket temporarily.
In order to adjust the position of the cowl later, it is loosely assembled here so that the bracket can be moved.
13
Put the cowl on.
Align the holes on the left and right side of the light with the holes on the left and right side of the cowl.
Align the bracket so that it comes inside the hole in the bottom of the cowl.
14
Install the bolts on both sides to secure the cowl.
The left and right bolts are included in the body mounting bracket set.
15
Align the bracket with the hole at the bottom of the cowl and temporarily fix with the included bolt and nut.
16
Adjust and position the clearance between the light rim and the cowl around the light.
17
Tighten the bolts on the body side of the bracket.
18
Tighten the bolts on the cowl side.
19
Installation completed.
Turn the handlebar to the right and left to check for any interference.
?
