■ Standard Spec.
Materiale: Alle aluminiumsmaterialer Keramisk belægning (Cylinder)
Cylinderoverflade: Farve: Umalet
Bore diameter: 63mm
Slagtilfælde: 57.9mm (NORMAL)
Stempel: Benzin med høj oktanværdi
Kompressionsforhold: Standardstempel 11.0: 1
[Produktindhold]
· S Stage Bore Up Kit
· FI Controller 2 (Injektionscontroller)
· Tændrør
* Da forskydningen bliver 125cc eller mere ved installation af bore-up-kittet, kan den ikke køre på en almindelig offentlig vej i de to typer mopedregistrering. Lukket kursus dedikeret.
* Fastgjort sportskamaksel (N-15) Det er dekomprimeringsfri specifikation.
* Normale dekompressionsdele kan ikke installeres.
* FI CON 2 er GROM (JC61-1000001-1299999) Det er til.
* GROM (JC61-1300001- / JC75-1000001-) · MSX125 · MSX125SF kan ikke installeres.
* Der er ingen funktion af skæringsbegrænsningsskæring. Gentag rotationsnummeret er det samme som normalt.
* Da HID-kittet til eksterne produkter udøver højspændingsstøj, der påvirker digitale kredsløb negativt, skal du ikke installere dem samtidig, hvilket kan forårsage funktionsfejl eller funktionsfejl.
* Tændingsudstyr til eksterne produkter bør ikke installeres samtidig med, at det medfører forstyrrelser eller produktfejl på grund af øget strålingsstøj, der ledsager stigningen i tændspændingen.
* Bemærk, at produktspecifikationer kan ændres på grund af producentens årsager.
■Standard Specifications
Material: All aluminum ceramic plating (cylinder)
Cylinder surface: unpainted
Bore Diameter: 63mm
Stroke: 57.9mm (Stock)
Piston: High-octane gasoline
Compression ratio: Standard piston 11.0: 1
[Set components]
・S-stage Big Bore Kit
・FI Controller 2 (Injection Controller)
・Spark Plug
This is a closed course only.
*Included sports camshaft (N-15) is a decompression-less type.
*Stock decomp parts cannot be installed.
*FI-CON 2 is for GROM (JC61-1000001-1299999).
*Cannot be installed on GROM (JC61-1300001-/JC75-1000001-), MSX125, MSX125SF.
*There is no function of rev limiter cut.The rev limit speed is the same as stock.
*Please do not install aftermarket H.I.D. kit at the same time because it produces high voltage noise which adversely affects the digital circuit.Failure to do so may result in malfunction or failure of operation.
*Please do not install the aftermarket ignition system at the same time because it becomes a cause of the malfunction and the product breakdown by the increase of the radiation noise accompanying the ignition voltage increase.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.