[Type] Billet Look
[Spakforhold] L-24mm (Afstand fra Lever pivotCenter til Wire StopperCenter)
[Materiale] Aluminium (Cut-outBody)
[overfladebehandling] HardAnodized
[Styrets diameter] Φ22.2 (Tommestang er ikke tilladt)
[Wire Stopper diameter] Φ8 (* 1)
[Udvendig ende diameter] Φ9 / Φ8 (Wire Spacer-brug)
[Håndtag justering] 20 trin Klik på
[Koblingsafbryder] Rulletype MikroafbryderStandardudstyr
[Vægt] Cirka 193g
* 1 Med plastikdæksel kan det være nødvendigt at fjerne dækslet.
* Billeder inkluderer andre typer og længder.
* 38 mm eller mere fra den ydre ende til Tyco centrum (40 mm eller mere, når der bruges trådafstand) nødvendig.
* Indeholder ikke halvt greb.
* KAWASAKI systemkuldklasse (ZX-10, Ninja1000, Z1000 ... osv.) Vi kan ikke bruge køretøjer med mange træk.
* Bemærk, at produktspecifikationer kan ændres på grund af producentens årsager.
[Type] Billet look
[Lever ratio] L-24mm (Distance from lever pivot center to wire barrel center)
[Material] Aluminum (machined body)
[Surface treatment] Hard anodized
[Handlebar diameter] Φ22.2 (Inch bar not available)
[Wire Barrel Diameter] Φ8 (*1)
[Outer end diameter] Φ9 / Φ8 (wire spacer used)
[Lever adjustment] 20-way click
[Clutch switch] Roller type micro switch as standard equipment
[Weight] Approx. 193g
*1 With plastic cover, it may be necessary to remove the cover.
*The image includes other types, lengths.
*38mm or more from the outer end to the center of the barrel (40mm or more when using a wire spacer) is required.
*Half lever is not included.
*It cannot be used on the models wiht a lot of trailing edge like KAWASAKI Liter class (ZX-10, NINJA1000, Z1000...etc.).
*There may be changes in product specifications due to the manufacturer's reasons.
*Please note that color orders are made to order and will take approximately one week to deliver.