■ Hvorfor er det nødvendigt?
Sådan kombineres modstridende temaer "køleeffektivitet" og "beskyttelse ydeevne".
Små sten og affald rullet op fra Frontdækket, insekter flyver i lyset ... etc. etc
Disse giver skade på radiator kerne lavet af aluminium finner.
Køleeffekten går tabt ved at knuse finnerne, og i nogle tilfælde risikoen for at beskadige WaterLine og forårsager kølevæskelækage ...
Egenskaber af ætsning fabrik
Radiatorens kernevagt af ætsefabrikken har gentagne gange testet mange gange omkring midten af sommeren 8 - timers holdbare Road race, der kan kaldes den mest hårde til radiatoren.
Layoutet på MeshPattern, tykkelsen af MeshLine og blændeforholdet er tæt pakket med feedbacken fra Race scene.
Center del er fint, begge sider er grov hexagonalMeshPattern.
Dette sikrer, at små sten og skraldespand, der var SpinOffed fra Frontdækket, er de bedste vagter i centerdelen, der matcher dækkens bredde.
Begge SIDE's grove masker har et blændeforhold, der tager højde for de modstridende temaer "køleeffektivitet" og "beskyttelsesydelse".
Der er også en grund til at vælge materialet.
For Aluminium eller Titanium, sænk tykkelsen (Reducere styrke) Mesh Line bredde, som kun kan realiseres af rustfrit stål (SUS3040.5t) Ved at vedtage det indså det uden at reducere styrken med den ideelle linjebredde.
Baseret på disse har Core Guard ikke kun et element til at opretholde præstationer, men også en Dress-up-effekt, der tilfældigt appellerer til skønheden.
Vi anbefaler dig med tillid til din store maskine.
■ Mulighed
Emblem er tilgængelig i 5 farver.
Vælg Koordinater for at matche din Maskins krave.
■Why is this necessary?
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
■Features made by Etching Factory
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse meshes on both sides are designed with an aperture ratio that takes into account the conflicting themes of cooling efficiency and protection.
■There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS3040.5t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.To protect, to charm.
It is recommended with confidence for your valuable machine.
■Options
The emblem is available in five colors.
Choose a coordinating color to match the color of your machine.