Separat smøring er mulig.
Hovedstråle nr. 115 Pilotstråle # 27.5
[Produktindhold]
・ VM Φ18 karburatorASSYX1
· Hovedstråle (MikuniRound Type / Large) # 110.0X1
· Hovedstråle (MikuniRound Type / Large) # 120.0X1
・ Strømfilter (Φ 32) x1
・ ChokerkabelAssyX1
L-TypeBracketX1 til chokerkabel
・ Sæt til karburatorsamlingX1
* Det kræver at opsætte stråletyper afhængigt af motorens specifikationer og kørselsmiljø. Sørg for at bruge OEM-produkter til indstilling, fordi KITACO Big Carburetor kit har vedtaget alle karburatorproducentens OEM-dele. Det kan forårsage problemer, og den korrekte indstilling kommer ikke ud, hvis den bruger andet end OEM.
* Det er muligvis ikke indstillingen, når kun det store kabine-sæt er fastgjort til et STD-køretøj.
* Bemærk, at lydstyrken for indtagelse stiger sammenlignet med STD.
* VM Φ18 karburatorsættet overholder ikke VINO (5 AU alle modeller) , APLIO (4JP9 / A) , BWS (5DA alle modeller) på grund af den tvungne åbning og lukning af karburatoren.
* Det kræver lille bearbejdning i bunden af hjelmboksen.
* Det er umuligt at bruge STD luftfilter.
* Bemærk, at produktspecifikationen kan ændres på grund af producentens årsager.
・Separate lubrication is possible
・Main jet #115 Pilot jet #27.5 pre-installed
[Kit Contents]
・VM Φ18 Carburetor ASSY. x 1
・Main jet (Mikuni round/large) #110.0 x 1
・Main jet (Mikuni round/large) #120.0 x 1
・Power filter (Φ32) x 1
・Choke Cable ASSY. x 1
・L-shaped bracket for choke cable x 1
・Carburetor Joint Set x 1
*Jets need to be set according to the engine specifications and driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*If you install only the big carb kit on a stock bike, the setting may not be achieved.
*The intake volume will increase compared to normal.
*Vino (5AU all models),APRIO [APRIO] (4JP9/A),BWS [BEWIS] (5DA all models) have forced open/close type carburetor and VMΦ18 carburetor kit is not compatible.
*Small modification is required at the bottom of the helmet box.
*Stock air cleaner cannot be used.
*There may be changes in product specifications due to the manufacturer's reasons.