Boring diameter] 76mm (Standardboring)
Slagtilfælde] 55mm (Normalt slagtilfælde)
Kompressionsforhold] 12,2: 1
[Produktindhold]
・ Smedestempel 58,5 mm højkomprimeringsstempel
·Stempelring
Stempelpind
・ Stempelring
· Cylinderhovedpakning
· Cylinderpakning
・ Spænderløfterpakning
* Det er umuligt at montere det på andet end STD-hoved.
* FI-controller 2 (Injektionscontroller) skal installeres på samme tid. Kombinationen med andre virksomheds produkter kan forårsage fiasko.
* Lagercylinderen kan genbruges, men hvis stempelafstanden er uden for den specificerede værdi, kræves finpudsning af cylinderen.
* Bemærk, at produktspecifikationen kan ændres på grund af producentens årsager.
* Der er 4 typer FI-CON 2. Bemærk venligst.
Til CBR250R (MC41-1000001 til 1399999)
Til CBR250R (MC41-1400001 til 1499999) 2 lampe forlygte model * FI-CON 2 fås ikke til CBR250R (MC41-1500001 eller nyere).
til CRF250L (MD38)
Til CRF250L ・ CRF250 RALLY (MD44)
[Bore diameter] 76mm (Stock bore)
[Stroke amount] 55mm (Stock stroke)
[Compression ratio] 12.2: 1
[Set components]
・Forged Piston
・Piston ring
・Piston pin
・Piston Circlip
・Cylinder head gasket
・Cylinder gasket
・Tensioner lifter gasket
*This product cannot be installed on other than stock head.
*FI Controller 2 (Injection Controller) must be installed at the same time.The combination with the products of other manufacturers may cause failure.
*The stock cylinder can be reused, but if the piston clearance is outside the specified value, honing of the cylinder is required.
*There may be changes in product specifications due to the manufacturer's reasons.
*There are four types of FI-CON 2.
*For CBR250R (MC41-1000001 to 1399999)
*For CBR250R (MC41-1400001 to 1499999) 2 lamp headlight model *FI-CON 2 is not available for CBR250R (MC41-1500001 or later).
*For CRF250L (MD38)
*For CRF250L・CRF250 RALLY (MD44)
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.