[Kompatibilitet] Til OEM akselaksel med låsemøtrik
- Bremsekaliberstøtten sælges separat (OEM kan ikke genanvendes).
- Hårlinje er ikke anodiseret eller malet.
- Nedre del af inderskærm (og batterihus) skal skæres mindst 10 mm fra bundoverfladen.
- Hvis du bruger fabrikstrinnene, kan kontaktfjederen forstyrre bremsekontakten. Vi anbefaler at skifte til hydraulisk bremsecyklus.
- Lagerbeholder, kædebeskytter kan ikke genbruges.
- Hvis målepunktet for cyklens samlede længde som anført i cykelinspektionscertifikatet er bagdækket, skal du bruge en justeringsbredde på 30 mm eller mindre.
- Der er tilfælde, at den indeholder en anden type på billedet.
- Bemærk, at produktspecifikationen kan ændre sig af producentårsager.
* Bemærk venligst, at afbestilling og / eller retur af dette produkt ikke kan accepteres, når ordren er afgivet.
●Lock nut for stock axle shaft included
*The product in the photo may differ from the actual product.
*Caliper support sold separately (cannot be used with stock caliper)
*Hairline finish is not anodized or painted.
*The bottom of the inner fender (and battery case) needs to be cut at least 10mm from the bottom.
*If you are using the stock step, change the brake switch to a hydraulic type because the switch spring interferes with the switch.
*Stock caliper, Chain guard not available
*When the point of measurement for the overall length of the vehicle body is the rear tire, use an adjustment range of ±30mm or less.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.