til STD Cylinder Head
med Main Jet # 150 Pilot Jet # 15
Det er muligt at bruge STD Air Cleaner (Det kræver behandling.)
[Produktindhold]
MIKUNI VM26-671 Carburetor Assembly x 1pc.
Manifold Set x 1pc.
Cap Bolt 6 x 15 x 2 stk.
Cap Bolt 6 x 30 x 2 stk.
Manifold Body x 1pc.
Manifold Packing x 2 stk.
Rustfrit stålbånd (Φ32-50) x 1pc.
Gummi Holder x 1pc.
Hovedstråle (MIKUNI sekskantetype / stort)
Advarsel : Indstilling af jetdele kræves afhængigt af motorens specifikation eller kørselsbetingelse.
* Da KITACO Big Carburetor Kit bruger ægte dele af karburatorproducenter, skal du sørge for at bruge originale dele til indstilling. Hvis andre dele anvendes, kan du ikke få den korrekte indstilling og vil have problemer.
* Oplysninger fra producenten.
for effektiv indtagseffekt !!
Type:
lager cylinder hoved
Beskrivelse:
vmΦ26 karburator til højindstillet motor.
■ større manifoldindtag til stor borecylinder.
Bemærk:
■ m / j # 150 p / j # 15 samlet
■ luftrenseren kan bruges (mods nødvendige)
■ option strømfilter kit
515-4021700 6 000
For stock cylinder head
○Main jet #150 Pilot jet #15 Assembled
○Stock air cleaner can be installed (modification required)
[Kit Contents]
Mikuni VM26-671 Carburetor Assy x 1
Manifold Set x 1
Cap Bolt 6 x 15 x 2
Cap Bolt 6 x 30 x 2
Manifold Body x 1
Manifold Packing x 2
Stainless Steel Band (Φ32?50) x 1
Rubber Holder x 1
Main jet (Mikuni hexagonal type / large)
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.