Det svarer til indgangsportens diameter Φ24-.
Udeladt
med Main Jet # 150 Pilot Jet # 15
[Produktindhold]
MIKUNI VM Φ26 Carburetor Assembly x 1pc.
Manifold Set x 1pc.
Cap Bolt 6 x 15 x 2 stk.
Cap Bolt 6 x 20 x 1pc.
Cap Bolt 6 x 40 x 1pc.
Manifold Body x 1pc.
Manifold Packing x 1pc.
Rustfrit stålbånd (Φ32-50) x 1pc.
Gummi Holder (VMΦ26) x 1pc.
Hovedstråle
Advarsel : Indstilling af jetdele kræves afhængigt af motorens specifikation eller kørselsbetingelse.
* Da KITACO Big Carburetor Kit bruger ægte dele af karburatorproducenter, skal du sørge for at bruge originale dele til indstilling. Hvis andre dele anvendes, kan du ikke få den korrekte indstilling og vil have problemer.
* Original luftrenser kan ikke bruges.
* Oplysninger fra producenten.
for effektiv indtagseffekt !!
Type:
vm26 tilbage
Beskrivelse:
vmΦ26 karburator til højindstillet motor.
■ større manifoldindtag til stor borecylinder.
Bemærk:
■ indgangsport od. Φ24-
■ m / j # 150 p / j # 15 samlet
■ opbrugt udstødning
* luftrenseren ikke anvendelig
○Intake port diameter Φ24 compatible
○Left-handed (baseball pitcher)
○Main jet #150 Pilot jet #15 Assembled
[Kit Contents]
Mikuni VM Φ26 carburetor assembly x 1
Manifold Set x 1
Cap Bolt 6 x 15 x 2
Cap Bolt 6 x 20 x 1
Cap Bolt 6 x 40 x 1
Manifold Body x 1
Manifold Packing x 1
Stainless Steel Band (Φ32?50) x 1
Rubber holder (VMΦ26)×1
main jet
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*Stock air cleaner cannot be used.