Det svarer til indgangsportens diameter Φ26-.
med Main Jet # 150 Pilot Jet # 15
Det svarer til KITACO ULTRA-SE Cylinder Head.
[Produktindhold]
VM 26-671 x Carburetor Assembly x 1pc.
Manifold Set x 1pc.
Knap Cap Bolt 6 x 15 x 2 stk.
Manifold Body x 1pc.
Manifold Packing x 1pc.
Rustfrit stålbånd (Φ32-50) x 2 stk.
Gummi Holder x 1pc.
Hovedstråle (MIKUNI sekskantetype / stort) # 130 x 1pc.
Advarsel : Indstilling af jetdele kræves afhængigt af motorens specifikation eller kørselsbetingelse.
* Da KITACO Big Carburetor Kit bruger ægte dele af karburatorproducenter, skal du sørge for at bruge originale dele til indstilling. Hvis andre dele anvendes, kan du ikke få den korrekte indstilling og vil have problemer.
* Original luftrenser kan ikke bruges.
* Oplysninger fra producenten.
for effektiv indtagseffekt !!
Type:
vmΦ26
Beskrivelse:
vmΦ26 karburator til højindstillet motor.
■ større manifoldindtag til stor borecylinder.
Bemærk:
■ indgangsport od. Φ26-
■ m / j # 150 p / j # 15 samlet
* luftrenseren ikke anvendelig
○Intake port diameter Φ26
○Main jet #150 Pilot jet #15 Assembled
●Compatible with Kitaco's ULTRA-SE Cylinder Head
[Kit Contents]
VM 26-671x Carburetor assembly x 1
Manifold Set x 1
Button Cap Bolt 6 x 15 x 2
Manifold Body x 1
Manifold Packing x 1
Stainless Steel Band (Φ32 - 50) x 2
Rubber Holder x 1
Main Jet (Mikuni Hexagonal Type/Large) #130 x 1
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*Stock air cleaner cannot be used.