Original, new and high quality part. It is excellent. Exactly as described in the website advertisement. It was great to buy from Webike. The piece came in well-designed packaging, with excellent storage, well protected and safe. Also, it has beautiful finish.View Detail

About quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingGenuine product.made in japan.well packed and send it without any damages. highly recomended.View Detail

This was a part needed for the small off roader I have in my back garage. The old one had been messed up with adjusting with the wrong tool. Not by myself but who ever had the bike prior to me. The part was easy to find by cross referencing Honda parts catalogue. I do always have more than one part in my orders as it saves on total shipping costs. EMS was used on this occasion and my order arrived in 5 days from shipping. Each part in my order was well packed and arrived in perfect condition. Now the cap is nothing special but it does have an important job to do. I made sure all the part was cleaned and installed correctly and now it looks a lot better and I can actually adjust with zero issues. Well pleased. Thanks Webike.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel. About the feeling of use,Two replacement 203mm long cylinder stud bolts were needed due to the original Honda cylinder stud bolts stretching beyond their service limit after numerous top end installations . Products to buy together, While you are refreshing these cylinder stud bolts you will also want to add the other two 196mm long cylinder stud bolts to your cart. Difficulty of installation, I can say the fitment of the cylinder stud bolts for my installation was very easy due to the ease of access and the process is explained in the service manual which just requires two jam nuts.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda cylinder stud bolt that will be suitable for most engine builds and much cheaper then the heavy duty cylinder stud bolts offered elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel. About the feeling of use,Two replacement 196mm long cylinder stud bolts were needed due to the original Honda cylinder stud bolts stretching beyond their service limit after numerous top end installations . Products to buy together, While you are refreshing these cylinder stud bolts you will also want to add the other two 203mm long cylinder stud bolts to your cart. Difficulty of installation, I can say the fitment of the cylinder stud bolts for my installation was very easy due to the ease of access and the process is explained in the service manual which just requires two jam nuts.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda cylinder stud bolt that will be suitable for most engine builds and much cheaper then the heavy duty cylinder stud bolts offered elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View Detail

Drilling holes in parts was troublesome, so I bought this bolted product. The location of the wire hole and the bolt fixing part are the same size as the head of the bolt, making it easy to use.too fast shipping, careful packaging.Give DRC a chance, trust it. Every piece produced is of high quality and good price.I'm glad to doing shopping from you , Thanks For EverythingView Detail

Great set of precision drivers and comparable to A*F. You really cannot beat them at this price on Webike. They are built like drivers costing well over $100 more. The head action is smooth and solid with almost no wobble. The bits are precise and strong. The knurling is precise and the grips are solid and can be adjusted over a rather broad range of the barrel. There are certainly differences (don't get me wrong,, but for any hobbyist or pro who can't afford to put a couple hundred in (or, like me, travel with my tools and am subject to losing them), these are a great option. I would definitely buy them over any of the plastic handled sets I've tried as the metal construction imparts a solidity and confidence that makes a difference when doing precision work. My only complaint is minor, but annoying. The box has a double row of supports that forces you to store the drivers with the grips in the middle. Everyone should adjust the grip to the point that works for them and it makes no sense to be forced to put it back to the middle every time you put the screwdriver away! I hope Vessel changes their box design in future. I tossed the box and now store the drivers in a tool roll so they stay adjusted the way I like all the time.View Detail

I have used these bolts on several carb repairs and they work great. webike has all the parts needed to do a great job at a better OEM and aftermarket value. fast shipping, careful packaging, really fastView Detail

I keep a compact set of tools nearby in case a spare moment arises in which to fix the part of my home/life that is presently causing the most inconvenience. Screwdrivers are essential, but I regularly need 5 to cover almost all household jobs: a multi-bit (and 6 interchangeable tips), a stubby a right-angle (for tight spaces), a precision (4mm) for very small fasteners, and a solid shank #2 Phillips for recessed holes.This Vessel model coupled with a 1/4"-to-4mm adapter combines four of those into one, leaving just the angled driver. Caveat that I don't mind using a stubby as a multi-bit.The build quality is chef's kiss, the palm spin method is already my preference so it's great to finally find a ratcheting driver that is designed around it, the $10 price tag is incredible and so very much appreciated, but the icing on the cake is the lovely suction "pop" of the stubby being removed from the shank. I could listen to that all day and am dreading the day it stops working but trying to live in the moment and appreciate it while it lasts.Such a good tool, for so many reasons, wish I had known about it sooner. I own a ratcheting snap-on and a couple ratcheting different brands but this one is the best of the lot. One of the few products I would give a sixth or even 7th star to if I could.The only negative thing I can think to say isn't fully negative: the magnetic multi-bit holder has a really tight fit, so unless you have a pretty ferocious grip, changing bits will take a little doing, or a pliers. I will never worry about a bit falling out but am expecting it to loosen up over time.Big tip!: Put your middle finger in one of the divots and grip the driver naturally and you'll never accidentally change the direction of the ratchet.View Detail

I never knew about this brand or JIS screwdrivers until I got one as a gift..Really bites into screw great when i showed it to my friend who is a long time mechanic he pulled out his favourite screwdriver from a massive collection of various brands. His was a T bar vessel.very very good for stuck screws one of the bestNow I buy them for my friends who own Japanese cars and motorcycles. Phillips screws are American. JIS screws are Japanese and are designed differently. You need a JIS screwdriver if you own a Japanese product. Plus it’s an impact driver!Weirdly, I've only used the actual impaxt feature once. It was useful then. But usually it's just the shape of the head itself that's the miraculous thing about this screwdriver. I've bought some more (small) Megadora screwdrivers too, and they're nice as well, but it's this one that seems just leaps and bounds better than other screwdrivers.Thank you also for the fast shipping and nice packaging.View Detail