Design, Cospa best!

This is a change from ARAI's QUANTUM J. I was going to buy ARAI's RX-7X I bought this one because I couldn't find a Graphic that I liked It looks like ARAI, but the shape of the Helmet itself is a Western spec The width direction feels harsh, but it is an acceptable range for me As for the surface finish, there is a feeling that it is not comparable to Japan The feeling of ownership of CarbonHelmet and the abundance of included parts:as a whole ( (Pin Lock Seat, Anti-fog Seat, and two Helmet Bags) and we are quite happy with it It isView Detail

After purchase, you have to remove the Inner Visor's protective seal and put the Inner Visor into the Body I removed it from the Body when I tried to install the Inner Visor on the Body after removing the protective Seal It broke They fixed it for free First time I used it, I was very happy with it And it's only Left It seems that the wind comes in from the groove of Lever for Inner Visor As for the size, the other Helmets on the LS2 also have the same problem One size fits all, seems to be smaller than other manufacturers It was a good decision to buy theView Detail

I was surprised at how light it was to buy I have it I would also like to buy the next helmet at this price with MFJ approval and different colorsView Detail

Len BarrelCart course has a White of this with a child's Ren BarrelHelmet and when I tried it over a 7 year old grandson it was a little tight, so I ordered the L Size of the Graphic model. As I imagined, a 7 year old grandchild (Boys) It was Exactly Size !!View Detail

I purchased Graphic "DiamondRed" is.
Surprisingly - - - I am afraid that I am surprised, but the overall shape is Stylish.
MHR / LS 2 BLAST 2 was tightly sharpened neck "Stylish" It is a shape.
And painting is also very beautiful, Graphic is not a cheap Sticker. Honestly, the impression of peeping is pretty good impression.

So, immediately MHR / LS 2 BLAST 2 "Tsukuba TOURIST TROPHYSeptember" We have been using NS2Class for!

I wear my head first.
Well, I do not have any graphs at all! Well, here I am disqualified from Yusuyasu and Fure, but as I wrote above, the thick Sponge is extremely equal etc etc. We support the whole head to. There is no sense that somewhere hit, or floating.

And especially noteworthy is its lightness and Balance. The weight is comparable to ARAI.

Whatever the weight on Specifications wears, waving your head, if you feel strange about the weight you feel it is NG. However, MHR / LS 2 BLAST 2 has no feeling of strangeness at all. By the way, I have been using Motorcycle for 20 years now, but I am only using ARAI for the time being.

Therefore, "Personal sense to the last" Although it is, a pretty Deep ARAIUser wears and swings around and "MHR / LS 2 BLAST 2 had no sense of incompatibility "(laugh).

Let's start with - - -

Wind cut sound! I do not mind! (It's a place I want to write as not really there, but Circuit does not care about wind noise in the first place - - - )
Lift! There is not!
Shield's cloudy!

While I ran, "This is not ARAI MHR / LS 2 BLAST 2 "What is Fit feeling, driving feeling about enough to forget.

it's amazing. Time was nearly the best Thailand came out in special sports driving (laugh)

However, perhaps the most Large thing, safety - - -. I do not know yet. However, I think that I will probably fall over in the near future (lol. At that time, let me report exactly how Helmet protected my head!

I report in detail, please have a look.

http : / / xn--pckmr6f9hc8d. net / category76 / entry285. html
View Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail