- Installed on my 2005 Spec III with Brembo P2 (34) rear caliper. Breaking is now progressive compared to the liner feel of the stock pump. Highly recommended to pair it with your Brembo product!Læs mere
- I use this rear master on all my motorcycles, not only does it work great, it brings that finished touch to the motorcycle.Læs mere
- Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to installLæs mere
- Since the details are kind of lacking, here's what you get;
-The rear cylinder,
-The mounting tab, it rides on the rail and is drilled for M6
-Stiffer Red Spring
-Bigger diameter fluid inlet, if...Læs mere - Assuming that Nisshin's Master Cylinder is not available, the cost will be high.Buy and compare this one too. You have to see it in person to understand.Since it is around One-offRear Sets, which are ...Læs mere
- Great piece of equipment. Great quality. Gorgeous outlook. Top notch finish and workmanship. Feels great in combination with brembo p2 caliper.Læs mere
- Very well made and light. Great feel and built quality. Perfect upgrade from stock unit. Better control of my rear brake with this unit.Læs mere
- I bought this for my GSX1300RI had a lot of trouble comparing it to other companies, but I decided on this product because of the hole pitch and 12ΦWith OEMTank, you won't have to worry about position...Læs mere
- I installed it on GCraft 3PRear SetsI selected 45mm Pitch, but because the mounting hole on the Slide side is difficult, I had to pimp it You'd have to pinch off 1-2mm of washer between them, or cut t...Læs mere
- The rear master cylinder arriving very soon after ordered. Once fitted to the bike it feels a lot lighter than original master cylinder with the same effect.Læs mere
- sehr schön verarbeitet, tolle einstellmöglichkeiten. somit für fast alle fußrastenanlagen montierbar. durch den flexibelen schuh sind einige mm "spiel" möglich um die bremse zu montieren. absolut zu e...Læs mere
- I purchase it for my 2014 Honda CBR1000RR to replace the OEM one.
The brake feels smoother and stronger.
Quality is top notch in comparison to Brembo but only half the price
Definitely recommendLæs mere - I exchanged the Master cylinder as well as changing Rear caliper to Brembo.Usability was OK at OEM's Yamaha Brembo, but it was the first thing that looked f ^ _ ^;Size is 40-49 mm without Offset, ...Læs mere
- I installed it in HONDA NSR 250 R MC 21. Caliper is CrabBrembo 32 mm.Although the normal master of MC21 is NISSIN 49 + 4 mm offset, this Gale master has a peculiar habit of mounting pitch, and if 49 +...Læs mere
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING