- I have used it on various motorcycles from 125 to 400cc with no problem.Some of them are also used for Large type Motorcycle, so it can be used for any more Large type Motorcycle.I think it will be us...Læs mere
- Several types of stem hole adapters are included, and the height can be adjusted, so it can be used on many types of cars.ZX14R owned by ninja250sl It worked fine for MT10.The texture is not as good a...Læs mere
- It's cheapSo far I have not had any problems using it.However, when I use it on 500Gamma, it hits the Cowl, so I remove the Cowl and use it.Læs mere
- [How is it used?So far I have been using Jack for Vehicle to replace the Tire. (Photo attached)I have done this over 30 times and have never once beaten Motorcycle.Reason for purchase1, I had a feelin...Læs mere
- No different from STAND's professionalManufacturerThis one is better for cheaper.Læs mere
- I think that it can be used without a problem at all in the medium and large type Motorcycle. I was able to use it on my CD50 moped, although the front floats quite a bit.Læs mere
- Bought this for maintenance on my 2012 model Ninja 250R.Although it was able to use it without a problem in Ninja250RThis product could not be used for 2010 MODEL ZX-10R.Stem hole diameter of ZX-10R i...Læs mere
- The Ninja 1000 is only 27mm long compared to the included Pin 24mm, so it's a little scuffed when jacked up, and it's not stable when jacked up, but it can be raised.It's going in at an angle, which c...Læs mere
- I bought it at a very low price during the Sale. The delivery time took over a month as guided on the order. It seems to be widely usable for motorcycles with Stem holes, but please consider carefully...Læs mere
- It was on sale, so I was able to buy it for only $8.000.This is my first Front stand.Rear. J-TRIP. I thought that I would be able to use the Front stand as well, because I use Mr. J-TRIP's, but becaus...Læs mere
- You can work safely by using Attachment that Exactly matches the hole diameter under the Stem. The rollers were heavy when lifting up, perhaps because of the single rollers. If you don't lift up, it w...Læs mere
- I use it on my GOOSE 350 for maintenanceIt is sturdy and easy to use with no interferenceI hesitated with a more expensive one from another Manufacturer, but I was able to find a Sunday I thought this...Læs mere
- I use it for MT-09SP and yzf-r25 It isThe ease of use is pretty good, usually maintenance is no problemI have also used the Front stand of JTrip, but there is no large difference If I can say, the wei...Læs mere
- I was able to raise the Front without any particular interferenceAs a KTM rider, I like the fact that it's OrangeThen there's the durabilityLæs mere
- Purchased for maintenance of the front areaRear stand is indispensable, but the Front can be raised and lowered easily and it is Large change satisfactionAs others have said, it goes up with no worrie...Læs mere
- The instructions say to choose an Exactly adapter for the bottom hole of the Stem shaft! But I was afraid of not being able to pull it out, so I put an adapter and lifted it up, but it was not fixed I...Læs mere
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING