- Valve is not LED, but no problem.A successor with a slightly larger size is already available, but I think it is still quite sturdy in a large size.No more chica-ching sound.Læs mere
- To be honest, any Relay that fits would be fine, but since we replaced it with a D-Light ONE from DAYTONA, we decided to go with a D-Light ONE made by DAYTONA.After the actual installation, the flashi...Læs mere
- I put this on my GSX-R1100 because the OEM Relay was getting old (but not broken) and I wanted to replace it as preventive maintenance. The size is a little different from the OEM Product, but the ove...Læs mere
- [How is it used?I purchased this product to convert Blinker to LED.Was the one you received as per Image?It looks like the Size Relay installation can be done as imagined.How was your experience with ...Læs mere
- I installed this lamp because I changed the blinker of my GB350s. it was a high flasher, but now it is a small blinker. the OEM lamp was 3Pin, but this lamp was 2Pin, so I was worried that I might not...Læs mere
- Used to LED the Blinker on gsx-8s.However, since I removed the tank for the wiring of the Grip heater and ETC, I thought it would be easier to replace the Relay under the tank on the gsx-8s. I thought...Læs mere
- Implemented change from OEMBlinker to Other Brand ProductIn that case, the OEM blinker relay was a high flasher, so we changed it and solved the problem.In the 2023 model of REBEL250, the blinker rela...Læs mere
- [How is it used?When we switched our Blinker to LED, Relay also needed to support LEDs, so we purchased this product.Was the one you received as per Image?The shape was exactly as shown in the Image.W...Læs mere
- GSX250R (2017) for BlinkerLED, we did not want to use Cement resistors, so we used this one.If #OEM is non-LED, the LED Blinker consumes less power (less current at the same voltage) than a light bulb...Læs mere
- It may be the smallest in a wide range of wattage from 1W~100W.It can be used without any problem even in car models with narrow Space!Læs mere
- The size is small, and the mounting rubber can change the mounting orientation horizontally or vertically.I am very satisfied with the product.Læs mere
- I used it on my last cbr600rr from 20 years ago! When I installed the KIJIMA SmallBlinker in the rear, I thought it would be large and strong because of the LEDs, but it worked fine when I turned the ...Læs mere
- Used in combination with LED Bulb.It was easy to install, no modification required.Læs mere
- Purchased as I converted my Blinker to LED, easy to install as I only need to replace the OEM.Læs mere
- I am on YAMAHA BOLT Shoulder Bag, but the OEMBlinker is a Lens due to Halogen bulbs. [Color] At the same time as converting to Smoke, the Blinker was also converted to LED.At that time, he purchased R...Læs mere
- Easy operation by simply connecting CouplerHowever,To get to the vehicle Blinker Relay.It was Large strange.It depends on the type of car.Læs mere
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING