The delivery and the quality of the product is good. The bad part is that it does NOT improve the performance. The top speed is exactly the same as before. The torque is LESS than before. I have installed it as per the instructions. I would definately NOT recommend this variator. There is a lot of contraversy on the internet about whether the rollers should be lubricated ot not. The instructions said that they should be lubricated and the little tube with the greese is supplied. I did lubricate the rollers as per the instructions and was disappointed witht the performance. I will try to wipe off the greese at some stage as it maybe needs less than what I have put (although I didn't exegurate at all). I will report later but in the mean time I DO NOT recommend this. CHeers.
View Detail
- Instock
228.93 DKK (5,291 JPY) 250.96 DKK Save 9%
leverings information
Temporarily out of stock.
Arrival date at our warehouse: inden for 2 måneder.
Product detail
*
* Oplysninger fra producenten.
til en mere max hastighed !!!
Type:
type x
Beskrivelse:
cost performance drive kit til høj acceleration ydeevne og max hastighed.
materiale med høj holdbarhed er tilpasset til type x-remskive
■ kobberbusk er nyligt tilpasset til høj holdbarhed.
Bemærk:
* stock vægt ruller ikke anvendelige. brug suzuki b type17,0,0 × 12,0.
Bekræft venligst detaljerede oplysninger om produktet hos ManufacturerHP.
.
Advarsel
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
kunde anmeldelser
Reviews with image
Fits:HONDA DIO110 All JF31 models
Fits:HONDA DIO110 All JF31 models
Jul 9, 2017
Dio110 (JF31) Absolutely recommended.
I read pioneers' blogs and reviews and decided to purchase.
We also purchased 14 grams of Weight Roller at the same time, so we included the included 11 g of Weight Roller
Please note that it is not Review at.
From the conclusion "Parts with little loss by buying" Is not it?.
Especially Dio 110 (JF31) The stall in the valley and uphill slope of Torque in the intermediate speed zone which is the weak point of.
Each stage improves from the NORMAL state.
However, although the durability was unknown and the fuel consumption was also insignificant, it got worse, and the fastest speed dropped by 1 to 2 o'clock per hour.
However, those who are dissatisfied with the weak point above by supplementing the Negative place with a certain effect will Recommendation to try this Parts first.
Fits:HONDA DIO110 All JF31 models
Apr 3, 2017
LEAD110 / I think that it will not be Impression because I'm installing DIO 110 for BENLY 50110, but first of all, making products is good. I do not think the price is so expensive. I do not know by diverting performance and function to another model. BENLY 50110 OEM Weight roller 1 pc. Weight 16 g, Weight roller 1 pc of this product. It weighs 11 g, Throttle 's rushing up is good, but it is too light for real running and it is skaing. We plan to replace with Weight roller of 15 g or 14 g
Fits:HONDA DIO110 All JF31 models
Nov 11, 2015
Medium low speed Torque improved.
I exchanged it during Dio 110 drive system Maintenance.
Although it depends on the solid difference and Wt setting after replacement, Torque characteristic is improved particularly in the usual range.
Hill climbing performance is also improved.
The maximum speed is slightly higher but it does not change.
It seems that fuel efficiency does not deteriorate extremely from the effect of TorqueUP - -
In my car situation it is the best situation if you judge by running performance only with 14 GX 3 setting of attached 11 G Roller X 3 + additional purchase but please do not refer it because there is a solid difference (Lol)
After exchanging, I have run about 5000 kilometers after one year, but durability is usable without problems. Cospar good.
New Custom Articles
