내로 4 타입 Φ7/8인치 스틸 핸들 바를 야마하 SR400에 장착해본 결과, 빈티지 감성과 궁합이 매우 좋습니다. 핸들 바의 슬림한 디자인과 적당한 각도가 SR400의 클래식한 실루엣을 더욱 돋보이게 해주며, 조향 시 안정감도 우수했습니다. Φ7/8인치 규격으로 순정 핸들 클램프에 무리 없이 장착 가능했고, 스틸 소재의 단단함이 고속 주행에서도 흔들림 없는 조작감을 제공합니다.
특히 장거리 주행 시 손목 부담이 덜하며, 핸들 포지션 변화에 따른 라이딩 자세 개선 효과도 느낄 수 있었습니다. 스타일과 기능성 모두 만족스러운 커스텀 파츠입니다. SR400의 매력을 살리고 싶은 라이더에게 강력 추천합니다.----------------------------------------------------------I installed the 4-type Φ7/8-inch steel handlebar on my Yamaha SR400 and it goes very well with the vintage feel. The slim design and moderate angle of the handlebar further highlight the classic silhouette of the SR400, and the stability when steering was excellent. The Φ7/8-inch standard allowed for easy installation on the stock handle clamp, and the strength of the steel material provides a stable operating feel even at high speeds. In particular, the burden on the wrist is reduced when driving long distances, and the effect of improving the riding posture according to the change in the handle position can be felt. This is a custom part that satisfies both style and functionality. I highly recommend it to riders who want to bring out the charm of the SR400.Powered by Google Translator
- Salg
- Instock
181.73 DKK (4,200 JPY) 190.38 DKK Save 5%
leverings information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
MONKEY
84-07 (Z50J-1600008-,AB27-1000001-1899999)*Requires top bridge H30 holder or MONKEY handlebar holder|*Requires throttle cable routing change.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Side caps can be used as stock.
-
GRASS TRACKER
-08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
-
Universal
Product detail
Håndtag Farve : Forkromning
[Håndtagsspecifikation]
Styr : Stål, sort / ydre diameter Φ22.2mm / Indvendig diameter Φ18mm
Det er muligt at bruge STD-kabel og slange.
[Styrestørrelse]
Samlet Højde : 160mm
Samlet Bredde : 660mm
Holder Mounting Part Effektiv Bredde : 130mm
Pullback størrelse : 270mm
Indre vinkel : 45 grader
Anteversion Vinkel : 60 grader
*
* Håndtag klemme (indehaver eller post) vist på billedet er ikke inkluderet i produktet.
* Den viste størrelse er den ene, når den placeres vandret..
Klik her for MONKEY håndtagholder
STD HandlebarSize liste over 7/8 inches Road model
7/8 tommer Scooter / amerikansk model STD HandlebarSize liste
1 tommer amerikansk model STD HandlebarSize liste.
JAPAN. Prototype, installationsbekræftelse, masseproduktion, styres konsekvent af vores egen virksomhed. Teknologi dyrket i mange år på East Large Osaka, omhyggeligt udvalg af Material by Know-how, flere former for polering, stempling af varenummer, høj præcision bøjning og svejsning, høj håndtag med stor indsats som kvalitet overfladebehandling mv. Bruger STKM 13 ASteel materiale med fremragende trækstyrke. JMCA sikkerhedsstandard værdi [Farve] Klar. Tykkelse, god holdbarhed og korrosionsbestandighed TripleNickel? Forkromning (Nikkel 3 lag + krom lag) Afslut.
Advarsel
* If there may be an instruction manual included, it will be written in Japanese.