This kit comes full with tools and necesary parts. Very well machines and is a perfect fit. Only minor modification required is you may need to modiffy the original brake wires to fit into the new switch.
View Detail
- Salg
- Instock
180.82 DKK (4,179 JPY) 189.43 DKK Save 5%
Webike Point: +42 pt
(1.81 DKK)
leverings information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
Produktbeskrivelse nedenfor automatisk oversætter af Google.
Product detail
BREMBO Radial Brake Master
[Specification]
for Φ 19x20, Φ19x18, Φ19x16, Φ16x18, Φ16x16
Mekanisk Type Switch
** Denne kontakt skal justere kontakten hver gang du justerer håndtaget.
* Koblingen kræver ledningsføring..
Mekanisk Type Bremsekontakt har hurtigere stop-lampe belysning, når bremsen påføres, end hydraulikafbryder
BrakeTouch forbedres, da overførslen til den følgende bil bliver hurtigere og sikker, og det hydrauliske tryk undslipper som hydraulik afbryderen.
Body er fremragende i rust forebyggelse ved Aluminium skrabning Body / Black Anodized Afslutning,
Den er færdig meget kompakt med små mikrobryder.
Switch bruger OMRON lavet med få fejlfunktioner.
Installation er Bolt On, og de fleste husvogne kræver ikke ledninger efter montering af krop (Nogle modeller kræver lidt bearbejdning) ,
OEMs ledningsføring kan monteres på Switch Direct.
Advarsel
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
kunde anmeldelser
Reviews with image
Jul 26, 2021
My hydraulic switch went bad and I was looking for a Mechanical switch and this is the one I got.
Installation was easy with the Instruction Manual.
I like it very much
Helpful?
Apr 15, 2021
MechanicalSwitch is built to not malfunction.
My previous Brake from another company broke, so I bought this product which seems to be well made in terms of safety.
It is a comparison with a certain factory-made Switch that was used before.
The 0 factory model comes with a stainless steel brake pivot pin, and the switch itself is a compact brembo.
I liked the Large variant because of its simple and stylish construction that does not destroy the design of the M3Bolt, but the M3Bolt one to BrakePivot!
So, if you run repeatedly, the switch will turn and the brake will stay on.
It happened many times, I over tightened the M3Bolt and distorted and broke the Brake switch and the Plate that holds it.
It was then physically and rationally installed and has been in use for about 6 years.
The newly purchased Switch made by Lady Bird is made to be conspicuous by the thickness and the size of the Switch which is Large, but
There is a stopper that prevents the Switch from malfunctioning, and it is well made, so I was able to install it with peace of mind.
However, it is not possible to install it only with the attached Hex wrench. Separately, 5.5mm Spanner, Wiring, Electric Works Pliers, etc. are necessary.
If you have never made a Wiring before, it may be difficult to install.
Also, since the brake switch is thick, it may interfere with the brake hose depending on the hose routing and may not be able to be installed.
I like the rugged design, but the brake switch is a prominent design, so tastes may vary.
Helpful?
Feb 23, 2021
I installed it on Ninja250 Radial master (brembo).
I installed it as per the Instruction Manual and tested the lighting.
When the brake lever is not held (SwitchON, pressed) Lights.
With the brake lever held (Switch OFF, not pressed) "Turn off"
and lights up in reverse of normal operation.
Just to be sure, I tried it with the OEM Brake switch and it works fine, normal operation (SwitchON = off, SwitchOFF = on).
Because it is not possible to run in the city as it is, the brake switch of OEM is processed in time, only the base plate of the commodity concerned is diverted, it installs, and it operates...
PartsParts itself was beautifully made, and "Less malfunctions, more reliable Switch. and the product description, but it is in a state of dissatisfaction.
Helpful?
Jul 1, 2018
One of the Best Mechanical Switches Out
There's only a couple of mechanical switches out for the non-RCS Brembo radial master cylinders and this one checks all the boxes:1. Looks good ☒2. Works well ☒3. Affordable ☒Installation is pretty straight forward, hardest part was the trial-and-error related to which wire goes to the switch to work with the OEM harness. I would recommend this switch to anyone looking for a proper mechanical switch.
View DetailHelpful?
New Custom Articles
