Used a set of these bases to mount aftermarket turn signals on the front of on my Kawasaki Z900RS Cafe. Great product! Bases fit the inside opening where the stock turn signals were located and the hole size was just large enough for the mounting shaft on the new signals.
View Detail
- Instock
34.57 DKK (800 JPY)
Webike Point: +8 pt
(0.34 DKK)
leverings information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
KAWASAKI
Open Fit Model Information Table
-
Ninja 1000
18-20 [Year]12/13 ABS [Model]ZX1000HCF/HDF
-
ER-6n
19 [Year]12/13/14 [Model]ER650ECF/EDS/EEF Front and rear/2 products are required.
-
Ninja 250
15 [Year]18/19/20 [Model]EX250PJF/PJFA/PKF/PKFA/PLFA Rear side only, one product is required.
-
Ninja 1000
19-20 [Year]11/12/13 [Model]ZX1000GBF/GCF/GDF Rear side only, one product is required.
Se alt
KAWASAKI
Produktbeskrivelse nedenfor automatisk oversætter af Google.
Product detail
[Antal]
· Antal: 1 sæt med 2 stk.
[Farve]
· Sort finish
[Materiale / Material]
· ABS
[Inkluderede dele:]
・ Bundplade XQuantity af samme form: 1 sæt med 4 stk.
[Spec.]
・ M8-M10ShaftBlinker kompatibel
Jeg vil gerne ændre Blinker, men jeg svarede en sådan stemme, at Blinker hole er bekymret.
Denne mængde: BlinkerQuantity i Set: 2pc. Det vil være indholdet af Set.
Mængde før og efter: 2 Sæt påkrævet.
Advarsel
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
KAWASAKI
- NINJA250 (EX250)
- NINJA250 (EX250)
- VERSYS-X 250 ABS TOURER
- VERSYS-X 250 ABS TOURER
- Z250 (2013-)
- NINJA250 (EX250)
- NINJA400 (2014-)
- NINJA400 (2014-)
- NINJA400 (2014-)
- NINJA400R (ER-4f) (-2013)
- NINJA400R (ER-4f) (-2013)
- Ninja ZX-6R
- Ninja ZX-6R
- ER-6n
- ER-6n
- NINJA650
- NINJA650
- NINJA650
- NINJA650
- NINJA650R (ER-6f)
- VERSYS650
- VERSYS650
- Z650
- Z800
- Z900
- Z900RS
- Z900RS CAFE
- Ninja1000 (Z1000SX)
- Ninja1000 (Z1000SX)
- Ninja1000 (Z1000SX)
- VERSYS1000
- Z1000 (Water-cooled)
- ZRX1200 DAEG
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
kunde anmeldelser
Reviews with image
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Installed on: KAWASAKI Z900RS CAFE
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Installed on: KAWASAKI Z900RS CAFE
Apr 9, 2022
Used these bases to install aftermarket turn signals on my Kawasaki Z900rs and they are a perfect fit. Takes 2 bases per turn signal, one for the outside and one piece for the inside. Opening for my aftermarket turn signals was was perfect diameter for the turn signals I used to replace the stock turn signals.
View Detail
Helpful?
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Jun 23, 2021
I think it could have been made of steel if I wanted.
It's not like it's cheesy with a crazy Plastic feel.
Chaft, used with Sphere Light Blinker installation
Helpful?
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
May 9, 2021
It's plastic, so it looks cheap.
If you are looking for a quality product, the recommendation is to use another manufacturer's Gold.
Helpful?
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Aug 8, 2020
Used to install a blinker from outside the company.
I used it to replace my Z900 Blinker with an Other Brand Product.
The M8Size is perfect as indicated by the M8 standard.
Thanks to this, I was able to install the external Blinker without any problems.
Helpful?
New Custom Articles
